Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How To Install An Electronic Distributor

Featured Replies

i wasnt seeing any sparks so i was holding the lead while cranking it. no spark. tried earthing the coil ZAPPPPPPPPPPP

 

muscle in my hand started twitching LOL

 

edit -

The only other idea I could have is the coil somehow not liking the module. The guy at Bosch said I must run a Bosch MEC- coil with this module, but I don't see how a "complete circuit, break circuit" coil trigger arrangement could really matter, especially since the coil -ve terminal on the module (with the coil disconnected) remained disconnected from ground (resistance wise) in both the "run" setting and during cranking....

 

seams a fella from the gemini club had the same problem. seams like the coil isnt like the module

Edited by Evan G

  • Replies 34
  • Views 401.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • cheers all   One thing I'd like to add though,   make sure you get your timing done properly after this install. The 'rule of thumb' to get to TDC works well enough but even then I was actually 11

  • Greater spark to create a cleaner and better combustion, no parts that wear out as often or at all. Easier to modify ignition timing to accomodate different driving environments.

Posted Images

tried earthing the coil ZAPPPPPPPPPPP

 

muscle in my hand started twitching LOL

 

:lolcry:

  • 5 months later...

I did the same thing testing the compression on a mates rx7. Laid the leads over the guard after taking them off the spark plugs to get them out the way. Then lent over the guard to hold the compression tester to the motor while my mate cranked the car. I copped it to the upper inside of my thigh. :S

 

Not good! Now i remove the lead from the coil :y:

  • 1 year later...

Hey guys just coming to this mod on the list of things to do..

I cannot find anything on ebay on this distributor, anyone have any ideas or leads on where to find this dissy?

  • 1 month later...

Thanks to jackbyo and also johno1986 for this informative "How to guide". Great work guys.

This got me out of the Sh*t when my original electronic dizzy died.

Recently I went to Bali for a holiday and I was speaking to a taxi driver about old Rollas and asked about parts. Long story short is that I got a brand spanking new electronic dizzy with pickup and module under the cap just like the original

for my 5K for $ 65 bucks. Couldn't get my money out fast enough.

My question is do I still need a ballast resistor if i'm using a Bosch GT40 coil as in johno1986 drawing.

 

Cheers Mustardo.

PS if anyone wants the Contacts of the mob I bought the Dizzy from in Bali send me an email and I'll send you the info. They do send to Australia but use DHL or the like. Don't use their postal service as it is based around the principles of black holes ;).

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.