Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rust In The Canals...

Featured Replies

Hi, I'm from Norway, so my english is not the best but, I'll try to explain:

 

I hava just recently bought a Corolla as my first car, but have seen some rust in the canals on both sides, it's so rusty it have became a nice little hole in there... Any1 know a really fast and easy way to fix this? I'll try to upload some pictures of it here later if I can.

 

This is my car:

 

post-15014-0-34981500-1324758043_thumb.jpg

post-15014-0-71575400-1324758109_thumb.jpg

post-15014-0-63736900-1324758120_thumb.jpg

post-15014-0-43218900-1324758129_thumb.jpg

post-15014-0-98791800-1324758137_thumb.jpg

 

As you may can see, it's some tape and a bit rust on the hood too, some1 knows how to fix this verry easy too?

  • Replies 37
  • Views 53.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • White is a very easy colour to work with, so you're lucky :)   Watch a few youtube videos on the subject, and give it a try.   You'll be amazed the results you can achieve with simple equipment...

  • Hi Benjamin, welcome to Rollaclub! Your English is a lot better then my Norwegian.......   The only thing I didn't understand was canals.   If the rust has gone through, your only option is to cu

  • Yes, I thought "gutters" but they don't really have them. Then maybe "channels"... door sills?   Take a photo of the rust in the canals for us Benjamin.   As parrot said, grind the paint back aro

Posted Images

Hi Benjamin, welcome to Rollaclub! Your English is a lot better then my Norwegian.......

 

The only thing I didn't understand was canals.

 

If the rust has gone through, your only option is to cut back to good metal and weld in a patch. It really depends on where this is as to whether you do that or replace the panel if that's feasible. The bonnet looks pretty bad, and I am guessing is worse on the inside of the panel. If I was you I would look for a replacement hood. One advantage of a white Corolla, it should be easy to find. A replacement will be easier and probably cheaper than trying to repair it.

Yes, I thought "gutters" but they don't really have them. Then maybe "channels"... door sills?

 

Take a photo of the rust in the canals for us Benjamin.

 

As parrot said, grind the paint back around the rust to clean steel then weld in a new piece is best. Second best is to grind it back then fibreglass over it. If there is any rust left around the hole treat it with a rust-kill product, one of the phosphoric acid liquids.

 

If the rust is just on a flat surface with no holes you can use paint stripper and a scraper to get the paint off and treat it with rust-kill, the paint over it.

 

Good luck with it, Norway is hard on cars, quite the opposite to inland Australia where nothing rusts.

rofl :lolcry:

  • Author

Here is one of them, I ment the channels, I think:

 

post-15014-0-04213600-1324816487_thumb.jpg

 

I will cut out this part, and then wield on a steel plate and but on some rust protection mass that I got for x-mas lol:p

 

And I'm going to paint the hood after I have used some sandpaper on it, verry fine sandpaper.

  • Author

And what kind of a cool shift knob u thing I shoud have in my car?

White is a very easy colour to work with, so you're lucky :)

 

Watch a few youtube videos on the subject, and give it a try.

 

You'll be amazed the results you can achieve with simple equipment...

 

For instance:

 

post-1955-0-37574400-1324845306_thumb.jpg

post-1955-0-98069100-1324845401_thumb.jpg

 

This car was badly faded, right down to the undercoat.

All I used was sandpaper, colour matched paint, clear coat, and a rotary polisher.

Repainted the entire right side for about $60.

  • Author

Cool, Yeah, and I'm going to polish it after all the work.

 

I'm going to do it at school, were we have a workshop, esy to do the job with real equipment, when I don't have the chance at home:-)

 

But any1 know any cool shift knobs that I can use in my car, any1 that u think will fit right in?

nah... Benny, dildos are for Dildos! Don't worry about a gearknob unless its a leather one from a BMW/Merc with a Toyota badge mounted on! Actually, ours is a 4WD=FWD knob from a Tercel 4WD!

 

Can you buy new channels?? Some cars you can, then you drill out the spotwelds on the old ones and pull them off, rustproof the car floorpan itself and weld the new one on. Its much better as the rust always goes much further than you think. When you're done you can fill them with expanding foam like in 7shade's post, it stiffens them up and stops water getting in.

  • Author

I can see, but I try to find out how much rust there is before I buy new channels. And if it's not soo much, I'll just cut of the part with rust and weld on a bend steel plate and then put on some rust protection, I think this will help, but we'lll see how much rust it is first.

  • Author

To x-mas I got a rust protection mass that I'm going to use on the channels:

post-15014-0-54579400-1325153057_thumb.jpg

 

I'm going to cut off the part with the rust, wield on a plate, and then use the rust protection over it, it is black, and the channels are black, so this should be good, don't u think?

Edited by CorollaBenny

Sounds good- shine a torch down inside the sill when you have cut the hole out and see what the rest of it is like. They rust worst around the A pillar at the front and around the very rear of it.

  • Author

I'm going to buy new channels anyway, just look at this!

 

post-15014-0-89926300-1325616497_thumb.jpg

post-15014-0-56374600-1325616524_thumb.jpg

post-15014-0-10574300-1325616547_thumb.jpg

post-15014-0-02836100-1325616562_thumb.jpg

post-15014-0-55831400-1325616580_thumb.jpg

 

This is too bad, I have bought new channels, and going to change them at school.

Edited by CorollaBenny

Excellent decision! ...and when you have the old channel off you can fix the rust in the car chassis around them before you fit the new one.

 

Snowy countries are very hard on cars! :(

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.