March 5, 201412 yr Author comment_678899 did an intank lift pump setup today as i was sick of the sound of the low pressure lift pump Report
March 6, 201412 yr comment_678951 I quite love this thing, keen as hell to see it with some boost, my cousing had a gt30 and it was nuts, was a little laggy but he could stab the throttle rolling at 70kmh and it would light them up Report
March 10, 201412 yr Author comment_679189 Started assembling things on the car. put the turbo, manifold and lines on, also put the fuel rail and injectors on. also took the intake off and spent some time changing the loom to hide it a bit more Report
March 21, 201412 yr Author comment_679799 so after seeing the price of a genuine garrett v band flange i decided to buy a $30 v band kit and turn it down to the right size and made up a dump pipe got everything together now just waiting on a waste gate. plugged off the hole and had a bit of a play with the laptop and got it idling. Report
March 25, 201412 yr Author comment_680030 splitfires showed up today so put them on, just waiting on a wastegate now couple of before and afters Edited March 25, 201412 yr by Ridemx21 Report
April 4, 201412 yr Author comment_680588 Got the car on the dyno last night but quickly ran into some Fuel issues before we got much done. So now i got some 1700cc injectors, Ordered a holley 12-1400 fuel pump and am sorting out some 1/2 inch hardlines and a better surge tank Report
May 8, 201412 yr Author comment_682439 Upped the fuel system 1700cc injectors Holley dominator 1400 pump Aeroflow surge tank 1/2inch feed 3/8 return Once it got a bit of fuel back into it the power figures got a bit more realistic too Report
May 9, 201412 yr comment_682473 Pretty damm stunning! It started off as such a cheap and simple conversion too... I also reckon white wheels, the black wheels are just so 'high-school' now. .. when are you going to be happy enough with it to just drive it around? :laff: Report
May 9, 201412 yr Author comment_682489 Pretty damm stunning! It started off as such a cheap and simple conversion too... I also reckon white wheels, the black wheels are just so 'high-school' now. .. when are you going to be happy enough with it to just drive it around? :laff: it gets driven daily, my only car at the moment Report
June 17, 201412 yr Author comment_684295 The heavy duty clutch i was running started to give up so i bought a hhdb exedy clutch and picked up a blown rb25 box so have a play with while it was apart, seem too all fit in pretty well so ill look at rebuilding the box and replacing the 20 box in the future Report
June 25, 201412 yr Author comment_684634 put my new clutch in doesn't feel the best with a very high release point but I'm told these clutches can do weird things for the first 1000kms while they bed in so ill see how it goes also had another couple of rockers break on me had some hand brake issues so decided to strip the rear callipers down and do a quick clean and rebuild and also found that the crank breather between the bottom end and the rocker cover is suppose to have a restricter in it so i pulled it out of the original pipe and put it in the new one Report
September 21, 201412 yr Author comment_688573 Gone solid lifters now Procam 260 solid profile (slightly smaller than the bc264s i had) And a bigger map sensor With some good results Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now