November 6, 201213 yr Author comment_635286 i know .... touching the tunnel, firewall and the back of the crossmember which I'm going to cut off Report
November 17, 201213 yr Author comment_636704 finally brought myself to cut the gearbox tunnel out... now the motors all bolted up .... just need to get a new gearbox mount made up.... Edited November 17, 201213 yr by flawless-paint Report
November 18, 201213 yr Author comment_636806 looking for a radiator and an intercooler .... anyone got any ideas or maybee to sell me ? maybe something like this ? radiator size :between 460mm wide 380mm tall 110mm thick... http://www.ebay.com....d#ht_1754wt_970 but for intercooler might have to get custom made ... haven't been able to find anything that fits between 675mm wide 375mm tall and 110mm thick Edited November 18, 201213 yr by flawless-paint Report
November 18, 201213 yr comment_636810 Why do you need a 110mm thick intercooler? We've got a 76mm one on a 4agte that makes 300rwkw. Just need to look for a good quality core. Edited November 18, 201213 yr by kickn5k Report
November 18, 201213 yr Author comment_636812 Why do you need a 110mm thick intercooler? We've g na thats what I've got to play with.... anything between the bar and the rad support and between the rad support and motor intercooler : 675mm wide 375mm tall and 110mm thick radiator : 460mm wide 380mm tall 110mm thick Report
November 18, 201213 yr Author comment_636816 how it sits at the moment bolted in quite close ... Report
November 18, 201213 yr comment_636828 s13 radiator fits fine, as long as you don't mind cutting the radiator support panel to suit. Report
November 18, 201213 yr Author comment_636833 engineer told me i can't chop into the radiator support but was thinking of buying this .... http://www.ebay.com.au/itm/56mm-custom-alloy-radiator-Toyota-Corolla-Levin-SR5-TE22-TE27-KE25-KE30-1966-81-/110922371965?pt=AU_Car_Parts_Accessories&hash=item19d37d137d#ht_2021wt_673 Bit small ? Edited November 18, 201213 yr by flawless-paint Report
November 18, 201213 yr Author comment_636855 s13 radiator fits fine, as long as you don't mind cutting the radiator support panel to suit. Hmm wish i shaved thAt lump off the firewall like yours Report
November 18, 201213 yr comment_636856 I wish i remembered to mention it before you did the paint! thats a shame with the engineer, they usually couldnt care less about the rad support. Anything that will fit in the standard hole is going to be on the small side, but might still do the trick i guess. Edited November 18, 201213 yr by oh what a nissan feeling! Report
November 18, 201213 yr Author comment_636861 The rad support is flimsy as shit anyway . No structural support at all .. But up to him not me .... Should be right ........ Hope so . Report
November 18, 201213 yr comment_636905 I hit my firewall with a hammer to make it fit for both the 30 and mk1 cortina, I have a 76mm thick intercooler and Holden 3 core radiator with 16inch thermo and temp switch I was going to use in the cortina but won't suit, They both had brackets made to fit, If your interested flick me a pm Report
November 28, 201213 yr Author comment_638097 been shopping ,pwr intercooler bought fuel setup bought, alloy radiator is in the process of been made by nathan at just alloy radiators and the tailshaft just got rebuilt n strengthened all round by kcdr driveshafts . and a few little bits are getting fabricated now so the coil overs n brakes fit, just have to mount the radiator cooler fuel reg and all the braided lines , weld the tunnel back up install the coil overs then she's off to get wired up and have the drag link installed Report
December 8, 201213 yr Author comment_639106 radiator,coil overs, brakes n steering knuckles in .... and 17s on the way ....pretty sure they won't fit but o well ...ill try it anyway Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now