February 8, 201412 yr Author comment_677138 yup :) like 50 bucks... i really enjoyed it tho... :) i used a lot more force than i would have managed while sitting normal and driving :P had to lay down partly and,take my hands behind the wheel and push on the firewall with my feets.... i pushed so hard i was shaking... so afterall it was pretty solid :) but it had stuck to the steering column pretty bad... Report
February 24, 201412 yr Author comment_678282 took it for a ride :D done with the rust welding... tihs is what i found onder the car.. since last time i swept the floor... may be 1/2 of the rust i have removed on the right side... and then we have the left side , front and back... haha bought some more primer... from this 3 colored thingy... to this then i loaded it on a trailer and brought it home... how many other cars would fit on a ATV trailer ? haha Report
February 25, 201412 yr comment_678323 Havent seen many rustier cars still running!!! Good on you for rescuing it mate. Loving your work. Report
July 7, 201412 yr Author comment_685303 thanks, yeah it was pretty rusty, but it was worth it :) lots of suff has been going on lataly, put this project away to rescue a Honda CB 1970 :) ill add a before and and after pic :) shit ugly.. this is AFTER a high pressure wash.. paint was like this all over.. after a LOT of sanding and bogging, i let dad paint it , turned out good :) after i finished that i figured one of the old Toyota Crowns we have needed a six cylinder instad of a 4.. so that got converted..the white one :) then it was back to the Corolla :) soo i figured i needed so many pars that i just might buy another car for parts.. so i went out and bought a similar car that previusly had a Turbo 2TG in it that was making 220+ hp, PO removed the engine, gearbox and the rear axle, car is modded to hydraulic clutch and transmition tunnes is modifyed a bit + it got some rust... even tho the paint is okay, going to use some parts from it then maybe put a CA18DET in it :) a friend has engine, ecu ,and everything i need + my brother is upgrading his s13 so we will be getting some spare parts like turbo etc.. don't say i shoud use this rolla instad of the other one, because this got some rust underneath, and it gots lots of chips and dents and a bit of surface rust, so it needs some paint anaywas... so ill save it for a future project :) got a nice steering wheel aswell nice front lip switched over the front plate... then some more bogging and sanding, just a example pic.. been bogging all over the car... then i decided to finish the welding, i had about 20 holes arround hte car that i needed to weld.. boot rustthreated behind the front plate aswell :) best trailer puller for sure! and here is my goal, i want to make a car almost identical to Chuck Wads's TE27 :) but mine will be a KE20 :) soo as you see that car does not have any bumpers, but i atleast want quarter bumpers, do anyone have a pic of a Xe20 with quarter bumpers? since i now got 2 sets of bumpmers , i am thinking of making one of them into quartes... and painting them black... :) Edited July 10, 201412 yr by SM Hunter Report
July 10, 201412 yr Author comment_685409 more bogging , or "sparkling" as we call it in Norway :P begining to look good, just some small chips left on this fender... i welded a bit long on it so it became too hot and bent... started on the lower part of the car aswell just a bit more bog needed here :D no more antenna and then we have this enormous dent... still not good.. when i'm finished i need to strip the interior and dash, then prep inside and in the boot, and i need to get hold of some red paint :) getting excited :D Edited July 10, 201412 yr by SM Hunter Report
July 14, 201412 yr Author comment_685536 removed the interior.. started removing the front windshield, and someone used tec7 to glue the windshield in place... had to ask dad for help.. trying to get the rear window out.. some rust.. bog bog and even more bog.. no more dents here! just some scratched etc in the bog.. i need to bog and sand a few more hours before it's finished... Edited July 14, 201412 yr by SM Hunter Report
August 4, 201412 yr comment_686517 From where did you buy those fender flares? If it is online, can you kindly mention the link? BTW, great work :thumbsup: Report
August 8, 201412 yr Author comment_686758 thanks B.L.Z:BUB, I'v put in too much time and effort considering I'm probly going to crash it when I'm getting my car licence, haha :P Bought the fender flares on ebay.. i decided not to use them, if i was going to use them i would need wider tires and rims.. and thats too expencive for me.. anyways here is a video, just had to take it out of the shed and test it.. i just love this car, its so light and fun to drive! not like anything iv driven before! the Toyota crowns we got feels like an old amarican car compared to this! iv wetsanded the car and its almost ready for paint, the thing is that dad is on vacation, and I'm moving away from home in a week to start school.. soo dunno how thats going to get done.. :( decided i needed some new seats, i went out and bought some really comfy bucket seats! took of the rails of the original seats and test mounted them on the new test mounted in the car , only got to mount one of the slides, they are too close to eachothers,, so i need to make something fancy there, and i need to make a mechanism to tilt the passanger seat forward.. Edited August 8, 201412 yr by SM Hunter Report
August 11, 201412 yr Author comment_686904 car is getting painted! 1 of the 3 colores is done! i have lots of masking to do tomorow, the stripes got to be perfect! I'v also made some mounts for the seats driver side passanger side, need to make the seat tilt forward.. Report
August 12, 201412 yr Author comment_686939 wet sanded and I'v started to mask it.. fixed up a lot of errors after this picture was taken, getting really excited about seeing it finished, Report
August 12, 201412 yr Author comment_686941 white is next up, going to mask alot tomorow, and hopefully paint it aswell :) ferrari 300 rosso corsa Report
August 12, 201412 yr comment_686949 BLZ BUB beat me to it, what a great action photo! Car is lookin pretty cool too, KEEP AT IT SON!!!! Report
August 13, 201412 yr Author comment_686982 i need some help... how the hech do i remove the glue from the stickers? i can't clearcoat this shit! been masking the rest of the car aswell.. i could jsut mask it off and wonder about it after I'v painted white.. Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now