nerfbat

wired in a light switch, to take the pressure off the battery when starting it also fitted a drink holder finished bolting her together and this is how it sits now

http://youtu.be/4R6UpDXdqpo Darwin winners?!?!? the only Harlem Shake i can watch right through

thats great to hear mate

is that due to the way the height was raised mate? if so, to eliminate that sharp angle on the CV, you can get raiser blocks for the crossmember/s, which were standard on the earlier models and foresters when lowering my forester, i removed the blocks. a sugggestion? yours may have been removed by the previous owner, to get more low? will try find a pic for ya from a '99 but you get the idea try to get under the car and see if these are missing mate the rusty looking spacer between the crossmember and sub frame

/sads.... am sure it went to a good home though

very lucky you found it before it got messy mate not counting this tho, how has it been running? i have read ya thread of course, but hows it feel to you?

haha true that mate..! and i feel ya RE washing your cars to say you 'worked' on them i read those 'what did you do to your ride today' threads and i want to just make something up sometimes as i am too poor or been lazy, etc lol

got onto a guy at Tmba Honda, who is into the Z50 monkeys, and hooked me up with a cheap rear tyre a Metzler ME7 130/70/10 $50 fitted...! how fcking cheapo are scoot tyres? why didnt i think of these earlier? lol it will pretty much tranform it from this to this i can't afford to buy one for a few weeks, but he is ordering it monday

couldnt afford paint, so i decided to do it on the cheap with the left over SCA Matt Black paint cans i had, also thanks to Rob for giving me one, doubling my stockpile..lol these, plus the leg guard panel, are the pieces that got the Wet & Dry treatment after the first 2 coats decided i needed to buy more paint after using up the 2 cans i had sold some of my old games to my mate's cash shop and bought 4 more tins of paint for 10 bucks so, the paint job cost at most 15 bucks... and I'm sure it will show when i bolt her all together tomorrow arvo last thing i did was fit a red T10 LED to the cluster, another leftover from the black KE 36 panno will post more pics tonce i get her back together

it reminded me of the angry croydon vic rds guys..! "It's not me, ITS THE FCKIN THEM!!!"

LOL..!!! Ladderman vs Police well worth the 8mins..!

hey guys, check this out http://www.houseofja...gkok-motor-show concept show reveal a Cali style Zoomer they may be bringing out..! if so, i am excite..! GOT FAT?!?

mate..! thats pure awesomesauce..! don't tempt, me lol but also, thanks for the pics..! that is pretty much exactly, the colour scheme i am looking for cheers mate

pulled the carby down, put an M25 washer under the needle to increase fuel flow, also put in a bigger jet from the other carb, it now pulls hard up to 60 kms i didnt take pics of the carb trick, but i found some from the guide i used before washer placed on needle and after it essentially enriches the mix thrughout the throttle range will check the plug after a day or so riding and adjust to suit tomorrow the Big Gun exhaust gets fitted properly, which may require a retune of the carb but I can't wait..! then paint, and i'll be sorta happy thanks for your time

playing with jets today.. got her running rather nicely pulls hard up to 60 now, but then sits on the rev limiter at around 70(speedo ends at 60, guessing 70 due to the needle place past the mark), but at least its perfect for town riding if i get her pulling hard and smooth right through to 65ish, i will then play with the variator/ weights/ ramps and push it a bit i am noticing a slight hesitation around 35-45 kms, but i found an easy way to space the needle up a bit, enrichening the mixture throughout the rev range tomorrow, ima try it, and play with the jets more more pics too then to paint it all either OD green, or flat back when i can afford it and THEN.... back onto the Ruckus/Zoomer thanks for your time

hi mate, originally, he was going to try and copy the one side that was still in good condition, but in the end he made up 2 new ones as he was worried it wasnt an exact copy they did turn out good, holding them against the side of the car, but i never got to fit them, as i sold the car, and he was in a rush to get her...

and cool, guys..! if anyone plays, my Gtag is UnaBomber add me and we can go ermm camping or something, lol

haha..! yeah the ruck will def be fixed mate..! doing the Metruck first, then the Ruck. wont spoil yet but i have big plans for her

I'm still playing them... have no life....lol

tail light wired up, and took her for a short ride around the block to test her out seems ok, but i will need to play with the carby i reckon, rejetting, etc, after removing the big and restrictive air box, and putting the 'Big gun' exhaust on her

wow, just WOW!!! this is gorgeous mate..! subbed

hi mate if you get desperate Andrew from Signs on Time in Toowoomba, did some up for mine. he may still have the scans saved ? http://www.signsontime.com.au/ ask for Andrew and tell him Zowie sent ya

still don't have a mobile myself mate but will pm you my mrs one, so we can chat its been too long :-)

thanks mate got antibiotics now, and can't get it pulled or dealt with til they have run their course... and that sucks mate...

nice mate handy for a few threads currently asking these Q's