puzzle man

the fog/mist in Sydney thismoring was so thick i could only see about 150 meters down the road. i don't think these pics court the essence of the thickness though.

yes but he wanted fiber glass stuff.. :D

here you go guys.... http://www.peterlack.com/panels.php#corolla 26coro04 Corolla KE30to55 Door LHS $50.00 26Coro05 Corolla KE30to55 Door RHS $50.00 26Coro07 Corolla KE 35 to 55 Bonnet $60.00 26Coro08 Corolla KE 35 to 55 F1/4 LHS $55.00 26Coro09 Corolla KE35 to 55 F1/4 RHS $55.00 26Coro10 Corolla [2DoorCoup] R1/4 LHS $60.00 26Coro11 Corolla [2 Door Coup] R1/4 RH $60.00 26Coro12 Corolla KE35(2DoorCoup)Door $30.00 26Coro13 Corolla KE35(2DoorCoup)Door $30.00

yes its all black and wraps around a bit sorry don't have pics ATM here was my 1st idea for a respray.. but when a mate did this for me.. thats what i want to do now.

bit of a up date got this to day from Just Alloy Radiators... and pulled the loom off the motor and got the fuel rail off and inlet manifold as it has to be cut and shut. also took the rocket covers off o and my vide of my car..

its to late now :sob:

that was the plan i had a mate with 79 corona and i was going to do a RA25GT

thanks man lol about the 55 there pretty much the same ex for *there heaver (side intrusion bars) *bumpers *dash *and they had a 4k in them

Hi guys Ive been meaning to do this for a LONG time now and here it is. its a little documentary thing on my KE35.. now if you can give me some feed back good/bad/very bad, thats fine if you want to point any thing out good/bad it would be very much appreciated. or if you think it could be changed some how to be better speak up thanks. apart from not having a microphone so you can here me good thoughts feelings comments and criticisms would be appreciated. thank you Craig

it was a good meat up at Villawood heres my pics from Villawood thanks Craig... http://s23.photobucket.com/albums/b354/puzzleman/Rad%20Rollaz%20Cruise/

went for a drive today to test my new seats and got some descent pics of my car..

went for a drive today to test my new seats and got some descent pics of my car.. these are the seats i got, the old ones were shagged and hurt my back so i got these one witch bolted up the original rails.

and the big hole that has to be filled. this is the hole filled I didn't really have the right kind of environment at home to finish them off anymore and basically this is the only way I have been shown how to do this kind of thing. I just figured at the time it would be easier to attach them to the bonnet and have a solid area that was bigger and more stable for me to work with. I mainly used the bog to really get the finished shape I wanted and to smooth out the area for painting. This is the first layer of bog I've sanded it back and shaped the area a bit more and will add one more layer just to even it out and smooth the area completly. looking good at last.... i primed it today and looks heaps better. this is just primer on the bits that were back to bear metal next week it will get hi-filled Got hi-fill/primer yesterday just have to leave it for a week to "bake" or dry up. then will wet rub and reddy for paint...... the hood is looking at not getting paint any time soon as hair line cracks have formed were the fiberglass joined metal... I'm glad i have left it unpainted this long or the cracks would have been on the top of the paint. To fix the problem i have to get the di-grinder out and cut it back to were metal meets fiberglass and bog it as the fine bog i will use will be flexible so in theory there should be no cracks in the long run... metal=flex fiberglass=no flex, when you close the hood it flexes a lot it might not look it but it does. so when all the hood has moved flexed the bits that can't flex with it (the fiberglass) will brake away from the stuff that can move/flex

this is the work on the hood... Thought I would let you guys know about my latest project I'm putting speed holes in my bonnet. These are some of the materials I've used so far, fibre glass resin, fibre glass matting, hardener to set the resin, scissors and heaps of small paint brushes. This is the sort of shape I was after but more flush looking. These are actually called NACA ducts or vents here are some of the aerodynamic advantages of these http://www.wisil.recumbents.com/wisi.....;/naca-duct.htm http://naca.larc.nasa.gov/ First off I made a mould of the shape I wanted using thin sheet metal. Once the mould was made I used aluminium foil as a base sheet which I covered in vaseline to stop the resin from sticking I also did the same to the mould. What you would normally do is put one layer of fibre glass matting and cover that in resin waiting for it to harden before putting the next layer, but because I'm impatient I put on three layers and waited for that to dry. You should do it one layer at a time and wait in between to prevent air bubbles forming and wrecking the finished product. I added 6 layers in total so I only had to do it twice. I've also added extra fibre glass around the sides which will be attached to the bonnet from the underneath, because I knew that these areas will be the ones needing the most support. At the moment I'm up to the stage of modifying the bonnet, I've cut out the area where the vent will be added and have cleaned the surrounding area in preparation. I have also shaped the outer edge of the mould to fit in the hole I've cut. The next step will be fibre glassing the vent to the bonnet from the underside and then be using a little bit of bog to fill and smooth all the areas to make a flush and clean area for the final step of painting. OK this is what i was up today i cut out the 2nd hole i grinded some paint away near the 2 holes (so the resin sticks better) i shaped the 2nd vent taped up the vents 1 because the tape holds it there 2 becasue the tape stops the resin from coming on the top side. (so it should be smooth when i take the tape off) here you can see the tape and all i do is run fiberglass matt over the tape to join the vent to the hood. and it glassed

was taking pics of my poker set.. Aces over sixes.. Smoking aces.. Rase.. Smoking aces2.. Flush.. and then Madison wanted to play.. small bet.. do i win?..

then got some cheap pine wood it was 180x31 so it was a little Short as the steal added 4cm but it was ok cost $19.95 for 2 bits.. cut some bits off the bottom shelf to make it fit.. and added some screws to hold the pine there. so it ended up costing me 73.85 but it was custum made and fits where i wanted it to. next week i will be puting in some down lights over the bench. thanks Craig

Thought i would show how i made my work bench this weekend. i wanted a high and narrow work bench to fit on the side of my garage.. so went to bunnings to get some tube steal but they don't have this steal (they've got every thing els:mad: ) so rang my dad who works for a steal place near Tamworth. and asked for.. some square tube steal about 4mm thick 4X 25cm long 4X 100cm long 4X 170cm long came to $38 then borrowed my farther-in-laws ark welder. got new pk of 50 welding rods $15.90. then started welding bits together but 1st hit the part i was going to weld with a wire brush. now I'm a baker not a welder i just picked up a ark welder one day and started useing it, its not that hard.. then when you get used to it.. and then all the frame knocked up..

thanks Craig

some pics from the city, i did not think there that good but thought id show..

this site has just about EVERY Toyota in any movie.. http://www.imcdb.org/vehicles_make-Toyota.html

all the ones Ive come across if the stripe is at the top its an auto and if its lower is manual :'(

if money did not matter.. mine would between these 3.. 2005-Lotus-Sport-Exige-240R Aston-Martin-V12-Vanquish or TVR-T350

guys if you want the full res pics i will be at: Toymods Dyno Day 16 - Sunday, January 27th at about 10am so let me know if you would like a DVD, at small cost of $2 thanks Craig

lol thanks mate :hmm:

if you need a cake PM me.. http://www.rollaclub.com/board/index.php?s...st&p=222049 or a Photographer :hmm: