rolln69
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by rolln69
-
I just put my new rims on today and the car is definitely in need of lowering. If I went with the ke20 Monroe shock would it work with ke20 top hats and ke20 superlow springs? Now you've got me worried kickn5k after saying yours aren't captive
-
Can't wait to hear the verdict. I hope they're not coming from California and we're here waiting 3 months lol. Like you said, they're just a ke20 listed part. Can't believe it's not all over the forum already
-
So Tommy ran that Monroe shock in his ke10? It's got 413mm compressed length and 606mm extend length. Worth a shot you think?
-
Kickn5k I just realised that it was your post I read lol. Can you tell me why you ditched this set up? And must you run 20 ball joints when you swap the strut...
-
I've been sitting on this for a while still. I spoke to a mate who's been playing around with corollas for years and he said why don't I just put complete ke20/25 struts in...do you guys know much about this? Pretty sure I read somewhere that its because of more positive camber...
-
You boys are absolute legends. I've got the ke20 top hats and ke20 lovell springs already sitting there so it's a matter of fitting it up and seeing what to do with that shock. I'm not very familiar with suspension territory but Parrot are you saying that the stock/RX7/KP61/TRD shock is shorter than the ke10? Thanks kikn5k - it seems like you're all a lot more cluey than I am here. I've heard that in theory ke20 inserts work and are shorter but it doesn't sit in right
-
Parrot, measurements would be amazing!! Kickn5k - same deal, photos would be super helpful or any other info you can provide. I want to run a sway bar but have been a tad put off after hearing about rubbing on brake pads, particularly ke20 ones. With this said, what is the part number of the one ke10s need? I wouldn't mind looking at the length etc. Thanks again for your input guys! Ps. so just to confirm, ke20 inserts have proven to be a hit and a miss on this forum?
-
Hi, Before I begin and people say to look at the ke10 suspension thread I want to say that I already have. I am in the process of lowering my ke10. I will be removing the transverse leaf. I am removing the ke10 top hats and swapping them with ke20 ones. I will also be putting in ke20 Lovell super-low springs. My question is...has anybody done this? I would also like to know if anybody has successfully changed ke10 strut inserts? Aw11 seem to be the go....
-
I'm running the same size rims on my ke10 with 175 50 13 Yokohama tyres. Only difference is my front rim width and offset.
-
Thanks for the feedback mate. I'm getting it all measured up for offset next week. I don't mind if it sticks out a bit as long as its no more than a couple centimetres. Your ride is overrated by the way! What specs are the black rims you're running? And do you have any pics to guide me with your previous/current fitment?
-
Thanks for the reply. I'll be getting the guards rolled that's not an issue, I'm more concerned with how it will sit and how far out. I have seen ke10's running 13x7 -7 offset but I'm not sure if they had a standard diff or shortened one. Unfortunately for me it's not a vehicle that people modify often.
-
Hi guys, I'm continuing to further modify my ke10 and have reached the stage of rim fitment. I'm after an aggressive stance and refuse to believe that 14x6 is the biggest I can go. I'm currently looking at a few options...a 15x8 +0 rear and a 15x7 +10 front. Or 14x7.5 -7 Is there anybody out there who's seen or done something similar.... Any help is appreciatedâș
-
Hey mate, I'm very curious about your ca18 transplant. How did you go with fitting the engine and tranny in? I.e. Any bashing of the firewall and/or cutting of the tunnel? Doug
