ausca62

Welcome Adrian. I would just lower it slightly and then leave it alone. I have a set of Pedders front springs you can have. Just pay the postage. They were off my wife's ae82. Let me know if you want them. Cheers. Paul.

A bit of front end work.

A little bit more work on the 20 over the last week or so. Starting to take shape. Started with the brakes. The old single master cylinder system got the flick and replaced with a Willwood adjustable bias setup. Original setup.

Thanks Doogs Cheers.

Anyone help me with front spring rate. I am using T3 coilovers and it will be a race car only. Cheers.

Thanks Pete. Its good to drag the old 20 out of the corner and get back into it. The last time it ran was the day you came out so I need to blow the cobwebs out. As for your wife, get her a race car. It will do wonders for her motivation.

Thanks man. I have ordered a pair of these already. If they are no good I will contact "T"

Taz_Rx. ???

Need bigger flare's. Not happy with these so will keep looking.

A quick coat of paint Then re install in the car. And to finish the day off, Jill started on the interior. Stay tuned Rolla Fans.

Seeing as this will be my wife's new car, it makes sense that she is hands on with the build. Fitting the Mini Spool. Then fitted the center into the housing. Tension up the carrier bolts. Then added a mount for the Panhard rod.

Ok so today we continued on the diff upgrade. We are using a Borg Warner 28 spline diff out of an R31 skyline. We used an auto one as they are lower ratio. 3.9 : 1. Finished off the mounts. And then checked the alignment. And then on to assembling the center.

A few more bits arrive over the last few days. I will be getting on to the build soon. Rear rotors. New seat. And new master cylinders.

Some more new parts ordered last night .

Had Jill working hard today starting to pull the motor out. Rather than trying to work around it while fitting the new pedal box, master cylinders and brake lines, I thought it would be easier to remove the motor. The new Pedal box.

I have gone for twice as many cylinders so the old girl has been past on to my wife.

The AE82 that will be replaced by the KE20

OK guys. So it's been a while with no progress. The good news is, The build is back on the agenda. Firstly the car has a new owner, "my wife" and she is keen. She has been racing her AE82 for the last few years but now wants to step up to RWD. Over the next few months we will be hitting it hard to get the thing back on the track. I have been building my new car for a while and now that it is finished it's time to get back onto the KE20.

Australian Hillclimb Championship 2016 Australian Hillclimb Championship 2016The 2016 Australian Hillclimb Championship will be conducted at Bryant Park, Bill Schultz Drive Yallourn. 27-30th October 2016 Add to my Calendar Event Details When Friday 28 Oct 2016 at 10:00AM Saturday 29 Oct 2016 at 10:00AM Sunday 30 Oct 2016 at 10:00AM WhereBryant Park, 100 Bill Schultz Drive, Newborough, VIC, Australia How Much $10/day Organiser Gippsland Car Club Contact Details John Bryant on 51741473 Mobile 0439741473 Email [email protected] About The 2016 Australian Hillclimb Championship will be held at Bryant Park, the home of the Gippsland Car Club, Bill Schultz Drive, Yallourn from 27th to 30th October 2016. days 1 and 2 are practice days and Championship runs will commence at 10am on the 29 and continue on the 30th October. All days are open to the public.

A few pictures i took today at the Australian Hill Climb Championship.

Frosty, You are a champion. Thanks again. Cheers. Paul. ;)

Thanks mate.

I'm after C52. If you have it would be much appreciated. I found this but it is not a great help. .http://www.corollaae92gts.nl/c52_revisie_EN.htm Cheers. Paul.

Hi Guys, can anybody help me with a manual trans workshop manual for an ae82. pdf format would be great but if not even exploded view's would help.I have a heep of manuals but none have the FWD gearbox. Cheers. Paul.

Hi guys, I want to lock the diff in my wife's Seca. I would love an LSD but for the $$$ I have been told by a guy that a mob in Dandenong do drive shaft upgrades. I think with camry CV joints. Has any body on here herd of this or what do you do.?? Does anyone have an LSD for sale?? Cheers. Paul.