Evan G
-
Posts
3817 -
Joined
-
Last visited
-
Days Won
23
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Evan G
-
can i buy one off of you?
-
what are the hardest parts to find in good nick for a ke55? and people who will pay good money for them? cheers Evan
-
yea I'm gonna respary the whole car anyways, thanks for the info parrot :wink:
-
yea I'm gonna cut it out 2moro, please someone tell me about this fish oil? weld the new section in a soak it with fish oil for a couple of days?
-
fish oil? i mean like rust inhibitor?
-
phewww thats good to hear, i make a shape for it and oxy it on :wink:, what do i use to kill the rust once and for all? cheers
-
theres a few small bubles appearing in the front quater panels, and chassis rust near the radiator support
-
let me know about any k30 with no rust in rear left 1/4 panel cheers people
-
am i better off cutting a quater panel off another ke30 and welding it on? suggestions?
-
7k = 80 hp (60 kW) at 4600 RPM and 103 ft·lbf (139 N·m) at 2800 RPM 4k = 65 hp (48 kW) at 5600 RPM and 72 ft·lbf (97 N·m) at 3600 RPM not enough to blow diffs? i wouldnt bother for 25hp and 40nm more, i prob can get that with a dodgy turbo 4kc my 2 cents anyways :wink:
-
whats the power/torque for the 7k compaired to the 4kc?
-
How Much To Sell A Reco'd 4 Speed And Trimatic?
Evan G replied to Evan G's topic in Automotive Discussion
thanks everyone, cleared up my question :wink: -
what brand sump gasket did you use? ive done my sump gasket 2 times and its still leaking ARGGHHHH
-
geez thats heaps! i want to know what model car i need to get the alternator out of? thanks mate
-
my alternator is charging a bit low under full load, ive read somewere i can swap the insides out with a ford xe 90amp alternator? can anyone confirm this? and pick a part is having a special $15 alternators this weekend win win :D
-
How Much To Sell A Reco'd 4 Speed And Trimatic?
Evan G replied to Evan G's topic in Automotive Discussion
I'm getting a 5 speed aswell but I'm gonna reco it and put in mine -
hi there, i got a 4 speed and a trimatic that I'm going to sell. should i pull it down/reco it/sell it a bit more? at least the person who will be buying them will have a peice of mind and not "i dunno the condition of it, i was told it kinda works" but theres no point paying $180 for a transmission rebuild kit and sell it for $100 opions? cheers Evan
-
wouldnt you need a crank angle/ cam angle sensor to feed the ecu with a input of postion of the engine?
-
YEAAAA BUT DOES IT does?
-
hahahahhaha thanks coln72
-
thank you rob for the excellent write up, i will def adjust the hand brake again, pedal is low not spongy etc cheers Evan
-
i went and got brand new vn commo rear pads, there isnt increase of pad surface area, they just just sit torwards the hub more, and theres still a 1cm gap on the out side of the rotor i couldnt see a adjust for the push rod
-
thats for the hand brake yes? ill adjust them again tomorrow after work
-
its low, i have adjusted the park brake (the only adjustment on the drums 80% sure) there isnt an adjustment on the pushrod, the thing is engine off the pedal feels normal, but when the engine is on and its vacuumed assisted the pedal just sinks? cheers rob
-
i was quoted 300 for a new one? :y:
