hey

 

been offered a set of AE86 adjustables anyone no if they would fit in the front of my ke30 or is it to much modification ? had a good look thru all the old posts n couldnt find much

 

cheers

Phil

adjustable what?

I would assume coilvers?

 

Depends if you have a set of ae86 steering arms to suit (if they do manage to fit your ball joints?) and you have some other form of strut tops to suit the ke30..

I would assume coilvers?

 

Depends if you have a set of ae86 steering arms to suit (if they do manage to fit your ball joints?) and you have some other form of strut tops to suit the ke30..

 

 

yea sorry adjustable coilovers. so they wont bolt up to the ke30 bottom arm ?

more than likely not..

I've run AE86 coilovers in a KE55 before. All the balljoints from the early (78-86) rwd corolla/corona's are the same. Just run down the wreckers and score some corona steering arms of an XT130 that has a steering box. Even better grab the whole LCA with the steering arms attached. That way you have steering stops and the wheels won't rub on the inner guard, and some negative camber. You'll get some track increase off the struts too.

i don't think you will have a track incraese, i think ke30 arms are similar or the same length as xt130 arms

 

but yes the xt130 or ae86 steering arms will be needed, other than that it should go straight in.

 

if there cheapish i say get em!

XT130 are the same as RA40, which is also same as the RT142 corona which then are all the same as a KE30... which i believe is same as KE55 :y:

use your 30 strut tops with 86 steering arms