towe001 Posted May 27, 2009 Report Posted May 27, 2009 what about a 1MZ V6 from a camry, use the box and get you shafts modified just need to arange the mounthing in the bay Just a touch harder then that... From memory 2.6 non-turbo litres is the biggest you can go in the '82 2mz-fe or the 1vz-fe, 2vz-fe or 4vz-fe from the engineering/mod plate point of view would be a better idea. 3vz-fe is just too big in more ways then one - power bulge on the bonnet and the firewall would have to moved further back Doing a B18 would be infinitely harder due to the engine spinning the wrong way..... Not really cause the Honda gearbox will be sitting at the correct end of the motor. Which leads into the next thing of that i reckon Honda got it right with the motor spinning backwards. A clockwise running motor when revved will want to tilt to the back of the car An anti-clockwise running motor when revved will want to tilt to the front of the car. Either a b16a, b17a, b18a or the vtec's d16a, d17a would be a lot easier to pull off from an engineering/mod plate point of view. Quote
Hiro Protagonist Posted May 27, 2009 Report Posted May 27, 2009 Not really cause the Honda gearbox will be sitting at the correct end of the motor. Do the Honda engines face the opposite way to the A-series as well? Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 i don't wats a 3SGTE because its been done b4.... to me it wont me my own one of a kind it'll be a one of several that have been done b4... and i think the challenge of goin f20c will be great fun as apose to doin something that has been done and then that person telling you how to do it... stass3... um not sure if i end up doin it or not cause at this stage I'm only in planning... ummm but if i end up doin it ill let you know and we could go from there... there will also be a 3 1/4 inch exaust highflow, cat, sports muff and 3'' dump tip... my bad i meant 2 1/4 inch... Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 Just a touch harder then that...From memory 2.6 non-turbo litres is the biggest you can go in the '82 2mz-fe or the 1vz-fe, 2vz-fe or 4vz-fe from the engineering/mod plate point of view would be a better idea. 3vz-fe is just too big in more ways then one - power bulge on the bonnet and the firewall would have to moved further back Not really cause the Honda gearbox will be sitting at the correct end of the motor. Which leads into the next thing of that i reckon Honda got it right with the motor spinning backwards. A clockwise running motor when revved will want to tilt to the back of the car An anti-clockwise running motor when revved will want to tilt to the front of the car. Either a b16a, b17a, b18a or the vtec's d16a, d17a would be a lot easier to pull off from an engineering/mod plate point of view. my thoughts exactlly with the spinning... Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 Another suggestion could be one of the motors out of the civic or intergra allready being FWD and all? B18C Spec R out of a 1997-2001 Integra Type R (JDM).... i suppose your rite.... and for all the money i save from not goin f20c... i ca spend on makin this thing handle like its on rails and it will still poon... and another thing.... some of you doubt this goin ahead,sayin that if i was going to actually do this i wouldn't have posted this thread... well fine... I'm now changing my mind from f20c to c32b ! take that :P Quote
trav_555 Posted May 28, 2009 Report Posted May 28, 2009 Quit talking about it and just do it already :P Quote
greenmac80 Posted May 28, 2009 Report Posted May 28, 2009 who cares dude just pick something different and do a real good tech write up. i'm sure everyone here will appreciate seeing something different. the honda engine (f20c) is good but heavy. but i would still love to see it happen Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 ok... so my dad has a new car so now i can drive his old datson pickup around.... and i got next week of work.... look closely for my build.... as its starting next week.... Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 and i am now the proud owner of a used JDM B18C Type R 98+ (Spec R) Motor set... COMPLETE BLOCK&HEAD 5 speed *LSD* Manual Transmssion WIRRING HARNESS INTAKE MANIFOLD EXAUST MANIFOLD ALTERNATOR DISTRIBUTOR INJECTORS CLUTCH FLY WHEEL PRESSURE PLATE THROTTLE BODY COIL PACKS POWER STEERING PUMP A/C COMPRESSOR :*Engine Mounts *Shifter Linkage *Axles *Half Shaft *ECU GOTTA LOVE EBAY :P Quote
1988ae82rolla Posted May 28, 2009 Author Report Posted May 28, 2009 Mad good luck with conversion cheers :P Quote
Bugzbarney Posted May 28, 2009 Report Posted May 28, 2009 No shit your really doing this aye, good luck with it! Keep the updates coming definitely! Quote
Jono Posted May 28, 2009 Report Posted May 28, 2009 this motor in a civic would be way cooler than in an ae82 liftback, and have a lot more resale value. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.