irokin Posted December 28, 2003 Report Posted December 28, 2003 I was poking around some links tonight and found this little beast http://www.users.tpg.com.au/deonrb/corolla.htm Some pretty impressive power output with 96hp @ rear wheels and a dyno sheet to prove it! Quote
blown 5k Posted January 1, 2004 Report Posted January 1, 2004 The last n/a motor i built had 105 hp at the rear wheels and it was only a 1300 rally engine :ninja: he`ll get alot more than that when he gets it sorted I'm sure Quote
Teddy Posted January 2, 2004 Report Posted January 2, 2004 thats some serious power from a rolla - nasty. Quote
blown 5k Posted January 2, 2004 Report Posted January 2, 2004 Not really 160 hp is possible at the crank for a n/a 4k.n/a thats naturally aspirated for those of you who might not know :ninja: forced fed motors 220 odd hp. Quote
Teddy Posted January 4, 2004 Report Posted January 4, 2004 160... I'm not complaining ! - what typa things do you do to then engine to get it to that - everything!? Quote
blown 5k Posted January 8, 2004 Report Posted January 8, 2004 yep thats the full monty std bore diameter 4k 160hp @9500rpm! :D Quote
Redwarf Posted January 9, 2004 Report Posted January 9, 2004 Thats good horsies from a 4K! I suspect a little difficult to hold it together? I know a couple of people who used to get that sort of grunt, but they ended up cracking blocks sooner rather than later. I know there is a reinforced block kicking around but I don't know exact details. Sounds like a clubman motor with that much grunt that high up! :D Quote
irokin Posted January 9, 2004 Author Report Posted January 9, 2004 What if you bore and sleeve it...then get it cryoed. should help keep it together. Quote
Medicine_Man Posted January 9, 2004 Report Posted January 9, 2004 ha ha ha, cryoed 4K, way to go :D Quote
Nitephyre Posted January 9, 2004 Report Posted January 9, 2004 whats zeeez cryoh joo speeka of? Quote
irokin Posted January 9, 2004 Author Report Posted January 9, 2004 http://www.nightrider.com/biketech/cryonews.htm theres cryoing in more depth. I think it has an effect...just not as much as you would hope for Quote
blown 5k Posted January 9, 2004 Report Posted January 9, 2004 Boring and sleeving dunno worth a go whos keen?or just keep the rpm ceiling down and put a rolla turbo on the side hullo 200 +hp :) :D Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.