3k Parts To Be Used On A 4k

[lph247]

I've done some research but am stuggling to find any real help.

I have two corollas one with a 3k (77 SE) and the other a 4k (KE35 75). I'm looking to beef up my 4k and get rid of the 3.

Can I take any parts from the 3k and use them on the 4k rather than buying new parts?

What parts can be put to good use?

 

Thanks very much.

[Evan G]

use the 3k head or do the proper thing and use the 4kc head and shave it down abit, use NEW rings bearings etc etc

 

webber

lump stick

exhaust

[kiahn]

only the head is worth taking, but even then its still not beneficial if you wanna spend an extra 80 bux to get head shaved

 

cam regrind, twin side-drafts, extractors to a 2 inch system, don't FORGET NEW WATER AND OIL PUMPS also thermostat

 

will have your car sounding orgasmic

[tojo2]

Keep the camchain , camgears , chaintensioner and guide as 3k stuff is probably double row and 4k stuff possably singlerow. Keep the cam and lifters for a regrind and pushrods for fun :) .

 

As mentioned the head. Whatever else you can bolt off and got space to keep.

[Taz_Rx]

.....Keep the cam and lifters for a regrind and pushrods for fun :) .

 

3k pushrods are about 20mm shorter than 4k ones Tor! ;)

If you want to put the 3k head on the 4k then you have to use the 4k pushrods.

[tojo2]

3k pushrods are about 20mm shorter than 4k ones Tor! :wink:

If you want to put the 3k head on the 4k then you have to use the 4k pushrods.

 

Yes I know they`re shorter

wich is why I wrote "and pushrods for fun" :wink:

 

Never know when you might need some ...

http://www.rollaclub.com/board/index.php?showtopic=30148

 

Guess I don't come across too well in translations

[anastasios]

pushrods are my favourite :wink:

[lph247]

woohoo

thanks blokes :D

i'l get to it and see what happens