YLD 10S Posted April 7, 2011 Report Posted April 7, 2011 I've always wanted to know, If someones pushed a K series motor to its ABSOLUTE limit, and what they got out of it? Interesting.... :happy: Quote
abbott Posted April 7, 2011 Report Posted April 7, 2011 http://www.rollaclub.com/board/topic/37924-dyno-sheets/page__p__407698__hl__%2Bdyno+%2Bsheets__fromsearch__1#entry407698 theres some ^^ Quote
Evan G Posted April 7, 2011 Report Posted April 7, 2011 guy that does speedway near my work said his 3k revs out to 11 grand and puts out 100hp. (apparently 2 inch piston skirts) i didn't see it so I'm skeptical :hmm: Quote
Sloth Posted April 7, 2011 Report Posted April 7, 2011 30..... maybe 40 rwkw? Seriously I'd guess 150-200kw if you spent lots and lots of time and money on it. (but as my sig states, it's just mere speculation). My 7k was worked and has twin SUs and only makes 58rwkw Quote
Evan G Posted April 7, 2011 Report Posted April 7, 2011 bog stock 4k in my ke55 with a gaymatic pulled 30.7rwkw Quote
GJM85 Posted April 7, 2011 Report Posted April 7, 2011 (edited) I'd say this guy got it right up there.... http://www.rollaclub.com/board/topic/48083-robbie-butler-79-drag-news/page__p__495557__hl__robbie__fromsearch__1#entry495557 Edited April 7, 2011 by GJM85 Quote
YLD 10S Posted April 7, 2011 Author Report Posted April 7, 2011 I'd say this guy got it right up there.... http://www.rollaclub.com/board/topic/48083-robbie-butler-79-drag-news/page__p__495557__hl__robbie__fromsearch__1#entry495557 WHAAAT!? 13 second N/A 4k!? That's amazing! Saw some dyno sheets from the first link posted of 5ktc and supercharged 5k's making 100kw+ Quote
Trev Posted April 7, 2011 Report Posted April 7, 2011 Guy I used to work with supposedly built a 160hp N/A 3k or 4k, my old boss backed this up. Quote
ke70dave Posted April 7, 2011 Report Posted April 7, 2011 have a read around about "TRD ke70" and "TRD" 's old rally ke70 with their k motor. 160odd HP apparently. i think its on youtube under "ke70 TRD" or something. Quote
philbey Posted April 8, 2011 Report Posted April 8, 2011 yeh I've heard of seriously worked 3/4ks making around 150ish at the flywheel. My 5K is 68rwkw. Quote
GJM85 Posted April 8, 2011 Report Posted April 8, 2011 (edited) When I was at Tighe Engineering picking up my cam last year, they did have a car magazine strategically placed by the counter. Can't remember which mag but there was an article on a yellow turboed 3k ke20/30 2 door claimed to be putting down 200+HP. I should go back there to just steal that magazine and scan the arse off it!!! Now I'm not one to just dribble shit... so believe it or not.... Edited April 8, 2011 by GJM85 Quote
kickn5k Posted April 8, 2011 Report Posted April 8, 2011 Saw some dyno sheets from the first link posted of 5ktc and supercharged 5k's making 100kw+ I keep forgeting to post in that thread but I'll wait till the new setup is done. My first setup was very mild 5k with twin su's made 48rwkw. The first tune on the blown setup was about 96rwkw. Then last tune on a hotter day was 104rwkw with more timing at same boost(9psi) it does have a huge blower cam though. New roller bearing turbo setup should make huge power for a "k" motor. But I'll have rods, custom pistons, head studs and a cyl head that I've spent weeks on the chamber design(and just about to cut in works pantograph copy mill) then goes off for for a almost $2k port and fix up sesion. For anyone off the street it would probably cost about $6,500-7000 just for the engine alone. Which I won't be paying as I work in the industry. Stu. Quote
GJM85 Posted April 8, 2011 Report Posted April 8, 2011 Big controlled compression plus high flow equals high end power!..... You'll probably kick the 150kw mark, making my previous statement concievable. Quote
YLD 10S Posted April 9, 2011 Author Report Posted April 9, 2011 I keep forgeting to post in that thread but I'll wait till the new setup is done. My first setup was very mild 5k with twin su's made 48rwkw. The first tune on the blown setup was about 96rwkw. Then last tune on a hotter day was 104rwkw with more timing at same boost(9psi) it does have a huge blower cam though. New roller bearing turbo setup should make huge power for a "k" motor. But I'll have rods, custom pistons, head studs and a cyl head that I've spent weeks on the chamber design(and just about to cut in works pantograph copy mill) then goes off for for a almost $2k port and fix up sesion. For anyone off the street it would probably cost about $6,500-7000 just for the engine alone. Which I won't be paying as I work in the industry. Stu. NICE! Hey, are you still selling some efi parts? Really interested! :) Quote
B.L.Z.BUB Posted April 9, 2011 Report Posted April 9, 2011 Ive seen mine pull 20hp. down a hill. with a breeze. :lolcry: its done 700,000k, give it a break for at least living that long! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.