kickn5k Posted December 8, 2011 Report Posted December 8, 2011 Oohhhhaaaahhh ohlins!! Yes please!! You'll need to strengthen the floor around the body mounts. But other than that you seem to have it covered. Quote
Mitch-12 Posted December 8, 2011 Author Report Posted December 8, 2011 yeah the rear end will be equal 4 link etc and the cage goes to the rear shock towers so ill sort it out good, and the front needs attention to put the strut top in the correct position kinda like lloyd smith has done but neater and a bit different. pedal box: Quote
Rob 5000 Posted December 8, 2011 Report Posted December 8, 2011 have u got the car back from evan yet? If so post a pic of the cage. Your doing all this work I hope the engine lasts for the entire day for you. Quote
Mitch-12 Posted December 8, 2011 Author Report Posted December 8, 2011 evan wont have the cage done till after christmas i don't think his started yet, none of this is getting put in untill after the 26th so on australia day i'm only running the ke70 stuff and those old hard semi slicks cause ive spent the new tyre budget on 17x10 rims. after the tampered day is when this stuff will get put in along with an ls7 engine that makes around 650rwhp reverse mount starter 5.5inch tilton carbon clutch and jerico 4 speed dogbox Quote
Mitch-12 Posted December 8, 2011 Author Report Posted December 8, 2011 just sent the rollcage guy an email getting him to do a 4 point cage for now and then doing the rear section once the shock towers are done to suit s14 shocks and the rear end is 4 linked :) and its going to be pretty much v8 supercar spec cage Quote
Rob 5000 Posted December 9, 2011 Report Posted December 9, 2011 ls7 that sounds like a logical engine transplant :yes: Quote
Mitch-12 Posted December 9, 2011 Author Report Posted December 9, 2011 one of our GT3 700HP ones :) Quote
Mitch-12 Posted December 9, 2011 Author Report Posted December 9, 2011 http://www.enkei.com/rpf1.html# also these are the wheels i brought in a 17x10 +18 5x114.3 Quote
Mitch-12 Posted December 10, 2011 Author Report Posted December 10, 2011 http://www.ebay.com.au/itm/Watts-Link-Triangle-/170646934891?pt=AU_Car_Parts_Accessories&hash=item27bb59956b hmm watts link... i'm tempted Quote
JJT036 Posted December 10, 2011 Report Posted December 10, 2011 Just read the whole thread from the first post, and mate, what a machine! Top Job Mitch! :y: To solve the presentation issue, snap necks, and paint it yellow. :) Very very good build Mitch. :yes: Josh :cool: Quote
Mitch-12 Posted December 11, 2011 Author Report Posted December 11, 2011 also i have to learn abit about fiberglass'ing I'm making a full widebody kit for this car when it gets the LS7 yeahh Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.