May 6, 201214 yr comment_602182 hey so i just pulled the supercharger off and put a turbo on and made 150rwhp now the exedy hd button clutch can't hold 150 hp what upgrades are there?? Report
May 6, 201214 yr comment_602188 hey so i just pulled the supercharger off and put a turbo on and made 150rwhp now the exedy hd button clutch can't hold 150 hp what upgrades are there?? This happens apparently. Another boosted K RC member was saying recently, he'd had the same problem. The pressure plate needs more clamp pressure, take the pressure plate off and send it off for a spring upgrade. My STD clutch held 100rwkw/134rwhp with huge amounts of torque. But if I slightly rested my foot on the clutch pedal it would slip, so I'm guessing that was pretty close to it's limit. Report
May 6, 201214 yr Author comment_602200 ahh i see well ill have a look at that, my other plan was to put an old supercar clutch in it and use 1 plate instead of 3 plates and machine it down Report
May 6, 201214 yr comment_602299 Have a look at the clutch plate..... Mine seemed slightly too small! There was a bit of meat left inside the contact area. DidYou machine your fw? Report
May 7, 201214 yr Author comment_602392 yeah your right taz the plate seems to be a bit small. maybe i can try an extreme or something Report
May 7, 201214 yr comment_602396 Thought about switching up to a T50? I couldn't imagine a k40/50 will last you too long at all.. Especially if you have a weldy(?) Report
May 7, 201214 yr Author comment_602435 where would i find a bellhousing and is the clutch used with that any better then the one i would have? Report
May 7, 201214 yr comment_602443 are you using a 180mm or 200mm clutch? i HIGHLY doubt a button clutch would slip with boosted 4k. ours didnt slip with a highly boosted 7k? derpp? Report
May 7, 201214 yr comment_602446 are you using a 180mm or 200mm clutch? i HIGHLY doubt a button clutch would slip with boosted 4k. ours didnt slip with a highly boosted 7k? derpp? Aforementioned clutch held up perfectly, Copped a reasonable amount of crap on top of the 250hp it was taking in the first place. Never slipped. Report
May 7, 201214 yr comment_602451 DidYou machine your fw? ^^^this, did you machine your flywheel??? Report
May 7, 201214 yr Author comment_602489 yeah fly machined its whatever size the stock 4k flywheel is havnt measured it. its on e85 and has lots of torque at about 130hp it starts to slip must be where its making the most torque i guess. also its adjusted correctly if anyone was wondering Report
May 7, 201214 yr Author comment_602510 No....was yh fw faced? T50 clutch isn't still 180mm jono thats what i mean re faced? Report
May 8, 201214 yr comment_602533 T50 clutch isn't still 180mm jono What do you mean? I was just assuming there'd be more/ better options for clutches for the t50. Never actually looked into it with mine Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now