Sznaps Posted October 17, 2014 Author Report Posted October 17, 2014 nice pic don't you think? :-) 1 Quote
Sznaps Posted October 20, 2014 Author Report Posted October 20, 2014 (edited) 4age.pl community october gathering Edited October 20, 2014 by Sznaps Quote
Skellington Posted October 20, 2014 Report Posted October 20, 2014 Music is classic. Nice video. Quote
Sznaps Posted November 7, 2014 Author Report Posted November 7, 2014 hehe check this out this is what a friend of mine came up with from the same track day. Its quite funny. 1 Quote
Sznaps Posted November 11, 2014 Author Report Posted November 11, 2014 i made up my mind to finally do some garage clean up for the winter. This is how it turned out. I'm quite happy with these wheel hangers - these save a lot of space. Before: After: Quote
Sznaps Posted January 9, 2015 Author Report Posted January 9, 2015 (edited) not directly about my rolla but .. Its wintertime and rolla sleeps in garage so not much going on so using christmas holidays I refreshed my hobby project www.cultrides.com - online ranking of most cult cars. If you like the page please like it on facebook. Thanks! :-) Edited January 9, 2015 by Sznaps Quote
Sznaps Posted February 18, 2015 Author Report Posted February 18, 2015 Hello gents. I came across this pic today and it simply enlightened me. I will go with such rims&flares look this season. What do you think sizes/parameters of these rims/tires are? Quote
TOMsGPTurbo Posted March 13, 2015 Report Posted March 13, 2015 Hmm, not sure, I'm not feeling those rears tho, doesn't look right, but what is that front bar off? Quote
Sznaps Posted March 16, 2015 Author Report Posted March 16, 2015 (edited) Well it bugged me that I would have to somehow harm rolla chassis (cut fenders) to fit such rims so I decided to stick with what I have and just refresh it. Its ready now - slightly darker and changes color a bit depending of angle of view. Edited March 16, 2015 by Sznaps Quote
Sznaps Posted April 19, 2015 Author Report Posted April 19, 2015 time for new season - tires ready & fitted Quote
AXLAMOH Posted April 28, 2015 Report Posted April 28, 2015 Hello, there is a question as did not find the answers to some questions. Iznochalno describe what I want to do and why: I plan on the basis of a scheme to collect GZE turbo - chardzher, I want to leave their home circuit with disconnecting chardzhera. Plan thereby solve the problem with the "souring" chardzhera after the 4500 revolutions. Turn the engine over 6,500 rpm do not plan to. Change the pulley on chardzhere, buy other camshafts no money. By supercharging planned to get killogram. I want to blow from the turbine in chardzher. I would like to hear your opinion on account of such plans, the challenges can be faced and if something in this scheme is not properly hear the reason why. ps Sorry for any mistakes, English is not itself speak, enjoyed a translator, so here is the original text. Добрый день, есть вопрос т.к. не нашел ответы на некоторые вопросы. Изночально опишу что хочу сделать и для чего: планирую на базе GZE собрать схему турбо - чарджер, хочу оставить родную схему с отключением чарджера. Планирую тем самым решить проблему со "скисанием" чарджера после 4500 оборотов. Круть мотор больше 6500 оборотов не планирую. Менять шкив на чарджере, покупать другие распредвалы нет денег. По наддуву планируется получить киллограм. Дуть хочу из турбинны в чарджер. Хочется услышать ваше мнение на счет таких планов, с какими проблемами могу столкнуться и если что то в этой схеме не правильно то услышать причину почему. п.с. извените за какие то ошибки, сам по Английски не говорю, пользовался переводчиком. Quote
Sznaps Posted April 28, 2015 Author Report Posted April 28, 2015 Hi Axlamoh, From what I understood you have a gze engine with bigger pulley and you suffer from 4500 dip in power problem (typical with these engines when you go bigger pulley). You plan to twincharge your system by adding turbocharger that would blow into supercharger. Do I understand it right? If yes then the first and main question would be what do you want to use for a computer because if you still want to use oem gze computer then I think most probably you will get nowhere. To my knowledge standard gze computer retards ignition when you boost over abour 0.8b - when you do the standard computer ignition map cannot comprehend what is happenning and cannot adapt anymore and retards the ignition and then you suffer from 4500rpm problem. SO in my opinion does not matter if you go turbo, twincharge or get bigger pulley for standard supercharger - as long as you will have standard gze computer you will still have this 4500 problem. Quote
AXLAMOH Posted April 29, 2015 Report Posted April 29, 2015 Not exactly, it is now a standard pulley small change to do not want to (expensive). I want to get pressure turbine of supercharging 1b. As for the computer, there were 3 different on MP2, 101 and 111 of the body, I have just 101, the computer understands boost 1b. In theory planirouyu to 0.5 chardzher blew up to 4000 RPM, then the turbine starts to spin and will press 1B further when chardzher longer gives gain power (4500 RPM) will operate the turbine. Another question you pistons, camshafts left or native was the replacement? That in addition to the computer and the ignition system was commuted? Не совсем так, сейчас шкив стандартный маленький, менять на большой не хочу (дорого). Турбиной хочу получить давление по наддуву 1б. По поводу компьютера, было 3 разных, на МР2, 101 и 111 кузов, у меня как раз 101, этот компьютер понимает наддув 1б. В теории планироую чтобы чарджер дул 0.5 до 4000 рпм, затем турбина начнет раскручиваться и будет давить 1б, далее когда чарджер уже не дает прироста мощности (4500 рпм) будет работать турбина. Еще вопрос, вы поршни, распредвалы оставили родное или была замена? Что кроме компьютера и системы зажигания было замененно? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.