untubbed_20 Posted October 26, 2019 Author Report Posted October 26, 2019 Made a 2.5 inch mandrel exhaust It was biggest i could get through crossmember and rack Quote
untubbed_20 Posted October 26, 2019 Author Report Posted October 26, 2019 Put fake original ex tip on the dumpy 1 Quote
untubbed_20 Posted October 26, 2019 Author Report Posted October 26, 2019 Gb galant twin master cylinder Quote
untubbed_20 Posted October 26, 2019 Author Report Posted October 26, 2019 Found this wilst shifting house a few months back.. Rare? Quote
untubbed_20 Posted October 26, 2019 Author Report Posted October 26, 2019 (edited) Anyway.. This is roughly where I'm up to atm. Started working on it April this year in my spare time. Pulled motor down 2 weeks ago to rebuild Head is getting mild port Arp 4age short headstuds O ringed block 7afe spool rods Ceramic coated hyperetic cast pistons Rollmaster adj timing chain Block is filled up to welsch plugs with rokblock resin dual valve springs with [email protected] hydro(290 ish advertised) cam 477 thou lift with a wide lsa (114) Probally only rev to 6200-6500 rpm tops No real goal.. A mid 12 or low 12 1/4 mile would be good. It ran 13.3@114 mph on 145/75/12 inch rims a long time ago..with a 2.2 60 ft.... Was a easy 12 sec car... Apart from that its just a cool old cruiser that i want to putt around in Edited November 20, 2019 by untubbed_20 Quote
untubbed_20 Posted October 27, 2019 Author Report Posted October 27, 2019 Sourced all n.o.s tierods/ballljoints,steering bush all the rubbers including the previously unattainable lower control arm bushes 1 Quote
KEI069 Posted October 27, 2019 Report Posted October 27, 2019 That’s awesome man, good to see a proper k powered project. I'm about to fit a trimatic into my thing aswell, did you have to massage the tunnel at all? Quote
untubbed_20 Posted October 28, 2019 Author Report Posted October 28, 2019 Yes..has a big tunnel in it for supra box .. Still could be wider for trimatic.... Quote
Jono.C Posted October 28, 2019 Report Posted October 28, 2019 Where did you manage to find the lower arm bushes!? Quote
untubbed_20 Posted October 28, 2019 Author Report Posted October 28, 2019 They make them. In thailand now.. Started a bit over 12 mnths ago Get them on ebay! Good hey Quote
untubbed_20 Posted October 28, 2019 Author Report Posted October 28, 2019 (edited) Ebay shop is.. Coniglio1975 Edited October 28, 2019 by untubbed_20 Quote
Taz_Rx Posted November 16, 2019 Report Posted November 16, 2019 Can't wait to see this thing ripping up the strip Darren!! 👍 Maybe you'll get that fastest k in Aus crown! 😂 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.