irokin Posted August 1, 2004 Report Posted August 1, 2004 yea V8s heat up the exhaust farkin quick. Got a mate in darwin that send me a few skid vids of his VR-SS...exhaust starts to glow within 10 seconds and its a Twin 3" Lukey with pacemaker headers Quote
Super Jamie Posted August 1, 2004 Report Posted August 1, 2004 watch the powercruise dvds, plenty of showcar kingswoods with the pipes glowing red on the burnout pad. v8 ke30 YLDTOY does the best burnouts i've ever seen, i have a movie at home, its mad Quote
Felix Posted August 2, 2004 Report Posted August 2, 2004 the best thing i've ever seen for exhaust glow was the boetcher mazda rx7 super sedan years ago at the speedway. it ran a blown 13b at the time. by the end of a race the exhaust would be glowing red hot at the back of the car, and you could see the extractors glowing whitehot through the front wheel arch. it was awesome, used to kick the ass of all the v8 guys. Quote
irokin Posted August 2, 2004 Report Posted August 2, 2004 its not really hard to get an exhaust to glow. ok for a K engine maybe but for the turbo guys a strap up mt coot-tha on reasonably high boost should do it Quote
justatoy Posted September 16, 2004 Author Report Posted September 16, 2004 hey all has anyone seen how to set twin su's on a k seris engine ive got all the plumbing side right just the excelerator side i can't figure out the linkages pull towards the left gard and as ya would know i need it to pull towards the right gard and in open to and suggestions Quote
irokin Posted September 16, 2004 Report Posted September 16, 2004 longer accelerator cable, comes around the carbys and pulls from the left side... pic coming right up... ok not the most elegant setup...but it works....(thats savages car btw) Quote
Teddy Posted September 16, 2004 Report Posted September 16, 2004 longer accelerator cable, comes around the carbys and pulls from the left side... pic coming right up... ok not the most elegant setup...but it works....(thats savages car btw) ohhhhhh don't make me jelious...! Quote
Felix Posted September 16, 2004 Report Posted September 16, 2004 with all the crap everywhere the pic is obviously a ke70. how did the block off plate on the exhaust manifold hold out? i tried that years ago before i went to extractors and found it impossible to keep sealed for any length of time. a set of SU's would be nice. Quote
Redwarf Posted September 16, 2004 Report Posted September 16, 2004 I had these set up by Iain Stewart of Carbtech in Redcliffe. Quote
Redwarf Posted September 16, 2004 Report Posted September 16, 2004 (edited) One more Edited September 16, 2004 by Redwarf Quote
Peter Posted September 17, 2004 Report Posted September 17, 2004 Sorry mate, been off the scene for a while, how far have you got? Quote
Teddy Posted September 17, 2004 Report Posted September 17, 2004 that is 200% horn -ohhhh :P ! yum yum yum yum yum yum Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.