styler Posted January 23, 2007 Report Share Posted January 23, 2007 info added earlier post Quote Link to comment Share on other sites More sharing options...
olskool Posted January 26, 2007 Author Report Share Posted January 26, 2007 Well again thankyou for everything guys but cause I was told it was bad I got rid of it so now I gotta find a t50 to suit the 4age so if anyone has one let me know pleeeeeeeeeeeeeeeeeeeeeeeeease. Quote Link to comment Share on other sites More sharing options...
tojo2 Posted March 16, 2007 Report Share Posted March 16, 2007 Toycrash has a great thread on toymods about oil leak issues with small bearing t50 (old type) when used on A-bellhousing. A -bellhousing is meant for big bearing t50 but can be adapted. http://www.toymods.net/forums/showthread.p...p;highlight=t50 Best - only explenation I have seen so far. Quote Link to comment Share on other sites More sharing options...
NickZ Posted March 16, 2007 Report Share Posted March 16, 2007 this seem to now be sorted but i thought id add my bit, I'm using a early 20 spline t50 with a 4a bellhousing for over a year now with a 20V including racing, no oil leak of destroying the box, I'm using a standard 20V clutch plate that came with the motor and using a standard K tailshaft, Maybe the oil leak problem is the shims for the bearings between the box and bellhousing where not the correct ones etc, I used two on the output shaft and one on the bottom shaft from memory, But as i said it was over a year ago and it isnt leaking there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.