Guest Sbox Posted December 10, 2007 Report Posted December 10, 2007 (edited) Deleted Edited May 24, 2008 by Sbox Quote
leigh Posted December 10, 2007 Report Posted December 10, 2007 After much waiting my KE30 2 door arrived, it came with some bits that were unusual. Someone had modified some center point injection and a electronic dizzy to fit the 5k. All the wiring was there as well as an ecu and they guy I bought it off said it was running before he bought it. The 5k engine is definitely in need of a rebuild as number one piston has the edge burnt away and number 4 bore is badly scored (wonder if the injection played a part, or whether it died a natural death). Can anyone identify the injection, dizzy and ecu? That is very interesting!!! Is it easy to open up the ecu? As I have seen a few with the manufacturer written on the printed circuit board ie: toyota, nissan etc! Quote
camerondownunder88 Posted December 10, 2007 Report Posted December 10, 2007 (edited) Hi, Interesting find I will say. As for the fuel injection it could be off a ford I was going ot do this a while ago but project was stopped so see if ecu as brand names etc on it might give clues. As for dizzy. Doesn't look home made it looks like a 7K-E dizzy. The newer vans that have K motors with EFI have a dizzy the ECU can vary etc so they run better and they look like the one you have. My local wrecker had one once I was tempted with getting it for my boosted K project But I was unsure of how much I could retard id with the ECU. But he was asking $120 for it so that is probably what it is worth. But all in all nice find. Go get 7K EFI gear for $200 at a wrecker and do it all Toyota again as most of the loom well similar wires will be there and hey EFI 5K :P Cameron Edited December 10, 2007 by camerondownunder88 Quote
Felix Posted December 10, 2007 Report Posted December 10, 2007 Don't think it is a 7k dizzy. The gear is in the wrong place, and it also doesn't have the drive tang to turn the oil pump. Quote
camerondownunder88 Posted December 10, 2007 Report Posted December 10, 2007 SHIT hey sorry about that I just also noticed the tang missing to drive the pump..This might be why the 5K died...LOL As dizzy then any numbers on it markings also home made machined stuff you can usually tell if it is DIY from lathe marks etc so more detailed shots. Also The old Bosch kit to make a hall effect setup on holden fits a K motor dizzy I tried it with a spare setup I had. So if it is home made could be a DIY housing running a kit like those bosch ones. So can we get internal pics etc? Cameron Quote
Guest Sbox Posted December 10, 2007 Report Posted December 10, 2007 (edited) Deleted Edited May 24, 2008 by Sbox Quote
Taz_Rx Posted December 10, 2007 Report Posted December 10, 2007 Its not a 7k dizzy Cameron, this is what they look like...... As for the injection, I reckon its probably falcon injection with the hovering injectors. :P Quote
Rollaboy2608 Posted December 10, 2007 Report Posted December 10, 2007 definitely EA Falcon TPI. don't know why they bothered with it to be honest cos it was a totally shit system. As for the ECU, how can you seriously tell from the outside without a part number? Apart from the pin connector shape, they are all pretty much a silver box! Quote
brodie Posted December 21, 2007 Report Posted December 21, 2007 Hey all That doesn't appear to be falcon TBI, as i have just finished putting this on a 3k with megasquirt, that looks more like a delco system off an unleaded JD Camira (the leaded ones were MPI) These can be quite a flexible and programmable system with the right software, looks like the dizzy has been modified nicely too. Heres a pic of falcon TBI on 3k in my ke30- (excuse the temporary throttle hookup) Quote
Guest Sbox Posted December 21, 2007 Report Posted December 21, 2007 (edited) Deleted Edited May 24, 2008 by Sbox Quote
Guest Sbox Posted December 23, 2007 Report Posted December 23, 2007 (edited) Deleted Edited May 24, 2008 by Sbox Quote
camerondownunder88 Posted December 23, 2007 Report Posted December 23, 2007 ^^^ Mate you are tops :y: How well do the N13 pulsar units go with boost? Cameron Quote
Guest Sbox Posted December 23, 2007 Report Posted December 23, 2007 (edited) Deleted Edited May 24, 2008 by Sbox Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.