Medicine_Man Posted November 25, 2004 Report Share Posted November 25, 2004 Also note that AW11s came with AFM (Air Flow Metred) engines, be it N/A (Naturally Aspirated) or GZE (Supercharged). If I was chasing a GZE, I would be getting the MAP (Manifold Absolute Pressure) sensored version. Can someone confirm for me if 4AGZE MAP engines only came out as smallport? A few I was looking at lastnight were all smallport versions. Also there is a thread on twincam.org about an AE71 GZE conversion, Click Here that you might find interesting.. Quote Link to comment Share on other sites More sharing options...
Teddy Posted November 26, 2004 Report Share Posted November 26, 2004 (edited) Justin - i can confirm from my research that GZE's (MAP) versions were only on small ports. :jason: http://www.users.bigpond.com/vidore/toyota_4age_engine.htm -> Great read :insane: Edited November 26, 2004 by Teddy Quote Link to comment Share on other sites More sharing options...
kiwi Posted November 26, 2004 Report Share Posted November 26, 2004 Brother go the 20valve supercharged engine, I have just finsihed one myself, in a KE70, if anyone wants a look , I will be putting the pictures of b4 and after, on my site in the next couple of days, anyone that wants to see it in real life organise to meet, and I will give you a look, all up for the whole lot minus intercooler, and brakes it has cost me $10 000, but it will be worth every bit, for next years Jamboree. :insane: and 4agze engines only came out small port. Quote Link to comment Share on other sites More sharing options...
Jason Posted November 26, 2004 Author Report Share Posted November 26, 2004 (edited) That is too much I am on a strict budget, I can afford to go over a bit, but not a lot. I've basically made up my mind to go for the 4AGZE, it got some power, I don't want to much, it is only my first car. Edited November 26, 2004 by Jason Quote Link to comment Share on other sites More sharing options...
Jason Posted November 26, 2004 Author Report Share Posted November 26, 2004 Yes, the later model puts out just over 120kw :insane: Quote Link to comment Share on other sites More sharing options...
demuire Posted November 26, 2004 Report Share Posted November 26, 2004 My 100kW 4AGE must suck then, with extractors and pod filter it makes 69rwhp :insane: Quote Link to comment Share on other sites More sharing options...
Teddy Posted November 26, 2004 Report Share Posted November 26, 2004 wow Been looking into the Ae101 Half cut - (see pic at bottom) To what i can find, a descent condition half cut Ae101 goes for about 2700 to 3000 - (yes / no / am i completely off track?) But the plan is (in this order).. - Get Ae71 (not Ke70, cannot be F**ed mucking around with finding Ae71 parts to put into Ke70, and all that goes along with it) - Clean up the Ae71 - Body Work & Interior work up to scratch for road worthy condition - Talk to blue plate person, get all the know how, whats a yes, and whats a no - Go out and get the half cut - Swap over motors using Ae71 drive-line and related stuff for now - Do the wiring, fuel, breaks and suspension - Full major service - Get mechanic / corolla expert to check it all over - Get it on the road, registered.. everything that comes with that - Look into stronger drive line accessories down the track It'll be a 2 year project, and I'm looking forward to it already :insane: Quote Link to comment Share on other sites More sharing options...
Teddy Posted November 26, 2004 Report Share Posted November 26, 2004 The Ae101 Half cut (i like the scoop :insane: ) Quote Link to comment Share on other sites More sharing options...
Teddy Posted November 26, 2004 Report Share Posted November 26, 2004 Okley Dokely ! The $500 Ae71 fell through - sold already :insane: ... But theres an even better condition Ae71 SPIRIT !!!!!!! for $1000 which we are looking at tomorrow :jason: - found over Internet, not via trading post ! heheheh Quote Link to comment Share on other sites More sharing options...
mumblezzz Posted November 26, 2004 Report Share Posted November 26, 2004 That wasnt the aw11 you were driving at drift day mumblezzz? It was indeed. Got hit up the arse while parked outside my mates place. Quote Link to comment Share on other sites More sharing options...
Teddy Posted November 26, 2004 Report Share Posted November 26, 2004 ooouch that sucks ! - are you able to ask ure friend if he is interested in selling in a lil while ? Quote Link to comment Share on other sites More sharing options...
demuire Posted November 26, 2004 Report Share Posted November 26, 2004 I'd almost suggest getting the front cut before you finish the interior (esp dash) because you'll most probably have to have to have the dash out to spline in the wiring. Apart from that, sounds alright. Quote Link to comment Share on other sites More sharing options...
Medicine_Man Posted November 26, 2004 Report Share Posted November 26, 2004 (edited) and 4agze engines only came out small port. Except for in the AW11 MR2 / AE92 Levin/Truneo, they are large port. read the link that matt posted. Edited November 26, 2004 by Medicine_Man Quote Link to comment Share on other sites More sharing options...
irokin Posted November 26, 2004 Report Share Posted November 26, 2004 That wasnt the aw11 you were driving at drift day mumblezzz? It was indeed. Got hit up the arse while parked outside my mates place. was it a blonde driver by any chance?. Such a waste, twas a shmicko AW11 Quote Link to comment Share on other sites More sharing options...
mumblezzz Posted November 26, 2004 Report Share Posted November 26, 2004 Some dumb bitch in a Forester or Outback or something. She was reading a map while driving and wasnt looking where she was going. Damn subaru drivers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.