Jump to content

Ae92 Toyota Levin - 4agte


Pure-SX

Recommended Posts

Well anyways here is my AE92 Toyota Levin :eatlead:

 

Specs:

 

Engine:

Ae101 4AGZE Block

40 Thou Overbore

P.A.R. Conrods

Ae101 LSD Gearbox (E58-11c)

Wiseco 8:0:1 Low Compression Pistons

TRD Piston Rings

Lightened and Counter-Balanced 4AGZE crank

Custom 4puck Ceramic Clutch

ARP Conrod and Head Studs

Cometic MLS Head Gasket

Ported and Polished 4age Head

HKS Valve Springs

HKS 264 Cams

Ferrera Valves

Precision SC50 450HP Dual Ball Bearing Turbo

Tial 38mm Waste-gate

Tial Blow Off Valve

3inch Custom Exhaust

3inch Yum-Cha Cannon

High Mount Manifold (HPC Coated)

Custom 3 inch Dump Pipe (HPC Coated, Heat Wrapped)

100KW 4AGE Inlet Manifold (Polished)

600x300x78 Front Mount Intercooler

Custom Intercooler Plumbing (Polished)

Custom Intake (Polished)

Pod Filter

680cc Injectors

M&W Digital Ignition

Haltech E8 ECU

Toyota 1JZ Coilpacks

Walbro 550HP Fuel Pump

Blitz iDIII Boost Controller

Greddy Turbo Timer

Custom Engine Bay Tanks (Radiator, Washer, Oil Catch)(Polished)

Modified MR2 4AGE Cam Covers

 

On BP 98 Pump Fuel at 20psi.. no timing advance and conservative tune made 205kw at the front wheels.

 

Suspension:

Cusco Zer0 2 Adjustable Coilovers

Standard Swaybars Front and Rear

Standard Brakes Front and Rear

Endless Pads Front

Ferodo Pads Rear

Fulcrum Polyurethane Bushes Front and Rear

 

Body:

Modified Ae92 Levin GTZ Bumpers

Modified Ae86 J Blood Side Skirts

Modified Ae86 TRD Front Lip

Modified Ae86 J Blood Rear Pods

Standard Rear Wing

Standard Hood Scoop

Colour Matched Mirrors and Bumpers

 

Interior:

Standard GTZ Buckets

Ae101 Steering Wheel

Issota Alluminum Pedals

Issota Gear Knob

Dash Mounted 5inch LCD Screen

Dash Mounted Defi Gauges(Water Temp, Oil Temp, Boost, Oil Pressure, Fuel Pressure)

Custom Short Shifter

Custom Carbon Door Trims

Carbon Center Console Trim

Haltech ECU @ M&W Ignitor Mounted in Passenger Footwell

 

Stereo:

Kenwood 7020 MP3 Headunit

Viscomm DVD Player

Viscomm 5Inch LCD Screen

Eclipse 6.5 Inch Component Speakers (Front)

Axis 6inch Component Speakers (Rear)

Digital Designs M1 1000RMS Mono-Block Amp

Digital Designs 2515 15inch Subwoofer

Custom Boot Enclosure

 

Wheels and Tires:

ANZ 17x7.5 Wheels Painted Purple

215x40R17 Federal Drag Compound Street Tires

 

Pics

 

IMG_0678.jpg

IMG_0682.jpg

IMG_0685.jpg

IMG_0919.jpg

 

At the moment just driving the car and getting used to it, few things I need to have fixed/looked at, clutch was slipping on 20psi so I am running 15psi at the moment, also the radiator seems to be blocked and or not sealing properly so that is getting fixed as the temps are alot higher then usual. Other then that going to have the tune tinkered with up here in Darwin after I get some new cam gears and fiddle with the timing.

 

Will eventually getting the interior retrimmed along with a respray of some sorts.

Link to comment
Share on other sites

Members dont see this ad

Nah bought as is :eatlead:.

 

Was somewhat the basis of what I was going to attempt to do with my ae82 sedan w/ 20V but realised its alot cheaper to buy it although you miss the I did it myself factor, still things I can do to this.

 

Although FWD, has plenty of traction, but of course, it torque steers. Its quite manageable but it doesn't like different surfaces/bumps etc when coming onto boost lol

Link to comment
Share on other sites

  • 5 months later...

Well forgot about this

 

God don't know where to start.

 

Probably around September, the clutch started to die, so I slowly turned the boost down till it got to hrrm turn boost controller off run off wastegate spring. Ran the car on 11psi for awhile, I took the car out on the last off street drag meet we had.

 

Car ran a 15.01 at 104mph on 11psi. I had a 3 sec 60 foot time due to me not launching it at all.

 

Car came off the road to get a new clutch in, upon removing the old clutch and flywheel it was discovered the flywheel had developed 2 cracks so that was binned.

 

Ended up getting an AP racing twin plate with a custom flywheel to suit.

 

Car is now back on the road and thats how it sits.

 

When our dry season rocks around I will be getting the car retuned.

 

Our drag season starts end of April :y:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...