Hay guy's i was just wondering if any one has a cold air intake

on a k motor???

And if thay can show us some pic's??

 

I have one on it cost me $20 from the wreakers

its abit short but. i need some more pipes to finish

it off and this is what it looks like sofar.

(pic's)

 

If you have done somethink like this and

if you can show us some pic's for some ideas

that would be cool

cheers

shaun

i have a 5k liteace induction setup on my worked 4k, to a pod filter hanging in between battery and radiator, makes mad noise, its in a box too, custom by myself, so its legal enough

 

ill get some photos later as its raining

 

cost 25 from wreckers and pod 40, including pipe off lite ace from wreckers

Hey shaun, just an observation, that pod sitting right on top of your motor is probably worse off than a standar Air Cleaner intake!

 

Might want to run a couple of feet more pipe.

heat rises you got up pod above a very hot place

:)

Edited December 12, 200817 yr by ke30Rolla myles

I have one on it cost me $20 from the wreakers

its abit short but. i need some more pipes to finish

it off and this is what it looks like sofar.

 

 

 

umm ^^^^^^^^^

Used to run an old radiator hose I found lying around the shed on the snorkle of the aircleaner. Ran it out through the radiator support panel so it sucked air from behind the grill. Cost $0 :)

don't add mroe pipe just swivel it so its not over the motor,

 

 

this cost me 30 cents of cutting disc, lol

Edited December 12, 200817 yr by DearmanKE

that is one messy and dirty engine

 

lol :)

yeah but it went damn hard, miss that thing

 

second gear snakeys in the dry any day and it was just a stock 4k that didnt idle properly lol

Edited December 13, 200817 yr by DearmanKE

not only is the filter above the motor but its directly behind the raidator and fan....

Yeah i was thinking of doin something like this but i don't no what to use???

Any one rigged something like this upto a 32/36 weber??

Hey Guys I was thinking of using sumtin like a Ramflo or K&N filter that just bolts to the carby,

then running a pipe from a hole in the radiator support panel to direct air to the filter like that?

mate seriously don't spend heaps of money, all it does is make a cool noise on a 4k, even on my worked 4k, it makes a nice noise and miight give me 1 or 2 in the high top top end

 

but my top end isnt really existant as i still have the stock carbi as i cannot deside what i want

 

just get a 5k plenum thingo and the pipe and a pod, easy enough, enclose the pod to make it all legal

 

cheers

 

Travis

or just put a stocking over the top of carb and drive like that :lmao:

+1 ^