phil86 Posted April 25, 2013 Report Share Posted April 25, 2013 Hey mate what was the paint you used for the block and gear box? Quote Link to comment Share on other sites More sharing options...
radrollaz Posted May 1, 2013 Author Report Share Posted May 1, 2013 (edited) Hi mate i use dupont paint, its cob clear over base coat and i mixed a few silvers i had lying around and got that colour. Thete is a colour called fine alluminium which looks great for engine blocks etc. Hi mate i use dupont paint, its cob clear over base coat and i mixed a few silvers i had lying around and got that colour. There is a colour called fine alluminium which looks great for engine blocks etc. Edited May 1, 2013 by radrollaz Quote Link to comment Share on other sites More sharing options...
radrollaz Posted June 23, 2013 Author Report Share Posted June 23, 2013 Hi guys, just thought id post an update on the rolla. Interior is nearly done just waiting on carpet now which should happen soon. finally put my sun visor on which gives daisy a more old skool look. managed to break the standard S2K tail shaft joint , luckaly it comes off easy and was an easy fix. looking into something stronger atm. they use uni joints in the states so might go that way. it took a 9000rpm flat change into second to brake the carrier bearing but its a weak link in the drive line in a standard s2k as the bearing cage brakes into pieaces and bearing try to exit the housing. check out pics ! enjoy. 1 Quote Link to comment Share on other sites More sharing options...
OKE055 Posted July 4, 2013 Report Share Posted July 4, 2013 Soooo much Rolla porn!!! Quote Link to comment Share on other sites More sharing options...
Skellington Posted July 5, 2013 Report Share Posted July 5, 2013 |blink| wow. Quote Link to comment Share on other sites More sharing options...
orangeLJ Posted July 5, 2013 Report Share Posted July 5, 2013 How are the painted front rotors holding up with a bit of use? Quote Link to comment Share on other sites More sharing options...
radrollaz Posted July 11, 2013 Author Report Share Posted July 11, 2013 Painted rotors holding up ok so far, I'm thinking when i finally get it on to the track they wont last long. Quote Link to comment Share on other sites More sharing options...
caibs Posted July 12, 2013 Report Share Posted July 12, 2013 ʞ©$ɟ me dead this thing is amazing. well done pal. i thoroughly enjoy the choice of motor. and everything else for that matter. wouldn't change a thing, that's something i don't think i've ever said about a car ! Quote Link to comment Share on other sites More sharing options...
radrollaz Posted July 12, 2013 Author Report Share Posted July 12, 2013 Thanks mate thats a great compliment. Quote Link to comment Share on other sites More sharing options...
radrollaz Posted July 12, 2013 Author Report Share Posted July 12, 2013 (edited) hi guys just a little update on the rolla, the interior is nearly all done. engine mounts have been re done as they were too solid for my likeing. Also painted up another set of chasers as my track rims on which ill put a set of Dunlop slicks that i scored of a mate. Next on the list is 4.11 diff gears and a detroit tru trac mechanical Lsd. enjoy ! Edited July 31, 2013 by radrollaz 1 Quote Link to comment Share on other sites More sharing options...
radrollaz Posted August 6, 2013 Author Report Share Posted August 6, 2013 check out the cool custom painting of the rolla i got from the misses and the selfie present i got my self for bday. F20c pulley kit ! Quote Link to comment Share on other sites More sharing options...
orangeLJ Posted August 6, 2013 Report Share Posted August 6, 2013 Nice job on the painting, does your missus paint? or did she have it done? Quote Link to comment Share on other sites More sharing options...
radrollaz Posted August 7, 2013 Author Report Share Posted August 7, 2013 she got it done here in sydney, we met a guy at a vw show a few years back that mainly painted cars. Quote Link to comment Share on other sites More sharing options...
Robski Posted August 12, 2013 Report Share Posted August 12, 2013 WOW Mick, The engine looks so clean and the car looks as though it was built with that engine in it from the factory. Can't wait to begin my next project (first Rolla project). I'm still tossing up between the tried and tested SR20DET or the F20C. I have loved the V-Tec and their Mild/Wild Cam for some time now so I am leaning that way. Possibly picking up a 4 door KE30 on Thursday, fingers crossed. In all a thorough build that you should be very happy with. Quote Link to comment Share on other sites More sharing options...
radrollaz Posted August 12, 2013 Author Report Share Posted August 12, 2013 WOW Mick, The engine looks so clean and the car looks as though it was built with that engine in it from the factory. Can't wait to begin my next project (first Rolla project). I'm still tossing up between the tried and tested SR20DET or the F20C. I have loved the V-Tec and their Mild/Wild Cam for some time now so I am leaning that way. Possibly picking up a 4 door KE30 on Thursday, fingers crossed. In all a thorough build that you should be very happy with. Thanks mate i appriciate your feedback, id have to say the sr conversion is cheaper and easier aswell as having more power. f20c is harder ,more expensive but its unique and is fun to drive. hard choice really. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.