April 25, 201214 yr comment_599783 Your work is really awesome mate. Keep it up. Can't wait to see a vid of it running and/or driving. :y: Josh :cool: Report
April 26, 201214 yr Author comment_599871 Cheers man. Not doin to bad considering I've never done anything like this before. Having done panel beating for 4 and a half years helps tho lol. And will defs be making a video on completion. Report
July 1, 201214 yr Author comment_613130 Got some motivation this arvo so started the final fit up Clutch and brake stuff in. Winning moment. Ae71 clutch line fitted perfectly onto f20c clutch slave Underneath Report
July 1, 201214 yr comment_613131 How have you ended up doing the engine mounts on crossmember? Thats what mine look like pretty much. (the engine and rubber mounts I mean) Report
July 2, 201214 yr Author comment_613269 Look back a page. Pretty sure I put photos up on how I done it. Just some tube steel cut in half and the s2000 locating plates flipped upside down and welded all up. Report
July 15, 201214 yr Author comment_615575 I started mocking up the dash loom to run power to ecu and dash. Could get past the immobilizer. So I thought I would try plug in some other Honda looms I had to see what would happen. So started with this That was a fail so did some research and turns out the immobilizer can be removed from the ecu Won't say what chip I removed but ecu looks like this now Then at about 10 Friday night I stared stripping the loom back to just the bare essentials At about 3am I ended up with this Wired everything in today. Couldn't get the dash to work and figured I ʞ©$ɟed something. So studied the pinouts one more time to be sure and found I missed a ignition 12v wire. Then this happened, followed by a little bit of froth Report
July 15, 201214 yr comment_615586 Looks good mate, i like your work. I'm doing similar conversion atm into KE30. Just got motor mounted over the weekend,just need to make the gearbox mount now. Report
July 16, 201214 yr comment_615856 that cluster is so sexy! i will be wiring in a haltech dash in a few weeks, wish it looked like this but! Report
July 23, 201214 yr Author comment_617208 Interior completed again. Just need to get some flooring eventually. And mount the cluster properly. Little bit of cutting will be involved here. Along with some zip ties to hold it in. I like this photo Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now