sharpshane Posted February 23, 2012 Report Posted February 23, 2012 (edited) I'm building the RAT! Going with flat black rattle canned paint for the outside, the rest can be your decision to make,,,BUT REMEMBER I'm going back yard cheap on this here's some pics from today's work, had all glass removed and painted the channels and parts of the cage that would be easy to paint now then with the glass in, painted the metal dash part too. before after before after The dash is all cracked up. Should I cover it up with black carpet and keep guages, or....tear it out and put a rally race dash panel with guages and switches???? YOU VOTE, YOU DECIDE! Edited February 23, 2012 by sharpshane Quote
19914afc Posted February 23, 2012 Report Posted February 23, 2012 Should have left the paint how it was, and needs a old side valve engine or an old toyota hemi V8 or something like that :) Quote
oh what a nissan feeling! Posted February 23, 2012 Report Posted February 23, 2012 The beauty if rattle cans is the paint falls off within about 2 weeks, then you get the opportunity to use some better quality paint. :yes: Quote
B.L.Z.BUB Posted February 23, 2012 Report Posted February 23, 2012 If you are gonna paint it ghetto i seriously suggest you use rollers. I did, it turned out ghetto but good ghetto. The paint actually sticks. Quote
altezzaclub Posted February 23, 2012 Report Posted February 23, 2012 You have black in the wrong places!! White the doors and black the bum! Don't forget the wheels! Quote
sharpshane Posted February 23, 2012 Author Report Posted February 23, 2012 You have black in the wrong places!! White the doors and black the bum! Don't forget the wheels! hahahahahaha! NICE! Quote
sharpshane Posted February 23, 2012 Author Report Posted February 23, 2012 JUST BOUGHT THESE BABIES CHEAP TOO! Quote
sharpshane Posted February 23, 2012 Author Report Posted February 23, 2012 now just how to put them on... Quote
sharpshane Posted March 9, 2012 Author Report Posted March 9, 2012 HELP! Trying to set up my dual webers. I would like a model or pic of someones set up so that i can go off of. I would like to hook up a fuel pressure regulator, fuel pressure guage set up. Thanks! Quote
Doogs Posted March 9, 2012 Report Posted March 9, 2012 Agree with 19914afc, previous paint looked better. The beauty if rattle cans is the paint falls off within about 2 weeks, then you get the opportunity to use some better quality paint. :yes: :y: Quote
altezzaclub Posted March 9, 2012 Report Posted March 9, 2012 I would like to hook up a fuel pressure regulator, fuel pressure guage set up. Thanks! Far too complicated! Just fit them and run them, they will probably be fine! If you have problems with it being too rich, buy a 0-5psi regulator for $50 and put it in the line between the pump and the carbs. Quote
sharpshane Posted March 9, 2012 Author Report Posted March 9, 2012 sounds so simple, done so simple, now it wont start. i have the 5 psi regulator inline, everything is hooked up now. i tried to start the dang thing and it wont fire up, it sounded like it wanted to but the negative cable got really hot???? :hmm: Now the batt is out of juice. I had to take the dizzy out to fit the carbys so i put it back in but it might be backwards. I flipped it both ways and got what sounded like back fires one way and nothing the other. Quote
sharpshane Posted March 14, 2012 Author Report Posted March 14, 2012 So i got the timing sort of set and the best runs!@!! :dance: I did some research and its time to upgrade to msd for all that fuel i need to burn :evil: i got the msd 6al and blaster kit. what do i need to put in the dizzy. I read some electronic ignition stuff but I'm not sure. keep the points set up? get an electronic dizzy? If so is ther a part to swap or the whole dizzy? Thanks!!! Quote
altezzaclub Posted March 14, 2012 Report Posted March 14, 2012 I know nothing a all about an MSD, but I can tell you that you will need a rotating trigger to tell the coil when to fire. Something will rotate on the rotor shaft and sweep past a sensor. Either points, an optical system or a magnetic system. The electronic dizzy I have was made for a 5K and has a magnetic trigger. Quote
sharpshane Posted March 15, 2012 Author Report Posted March 15, 2012 I think i find a electronic one at the junk yard. Do i need to hook up vacuum advance with dual dcoe's? i see BRD removes the vacuum advance Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.