madkp61 Posted December 16, 2012 Report Share Posted December 16, 2012 I'm thinking of paint stripping my stalet doors if I was to take it back to bare Metal would I have to etch prime it then primer and then paint? And what diff options do I have for a ke30? Quote Link to comment Share on other sites More sharing options...
altezzaclub Posted December 16, 2012 Report Share Posted December 16, 2012 I didn't... We used chemical stripper and a tungsten scraper to get it back to bare steel, treated it with Rustkill (any phosphate product), gave it a thorough wash & dry then undercoated it. Quote Link to comment Share on other sites More sharing options...
parrot Posted December 16, 2012 Report Share Posted December 16, 2012 My general understanding is that you should etch prime if you have anything more than small areas of bare steel. That's just from lots of reading and talking to paint shop guys. I gather it results in better paint adhesion Quote Link to comment Share on other sites More sharing options...
madkp61 Posted December 16, 2012 Author Report Share Posted December 16, 2012 So if I paint strip my doors I should use etch prime, and how long can I leave just as bare metal? Quote Link to comment Share on other sites More sharing options...
madkp61 Posted December 16, 2012 Author Report Share Posted December 16, 2012 Like will I have to Etch prime it straight away after I paint strip it or can I leave it a couple of days? Quote Link to comment Share on other sites More sharing options...
love ke70 Posted December 16, 2012 Report Share Posted December 16, 2012 theres a product, or a few on the market, that once you go to bare steel, you treat it with. contains phosporic acid. stops the steel rusting for a few weeks. i used that, then etch primed, then primed within a few days. remember, water still soaks through the primer, so you need to actually get the car into proper paint sooner rather than later. can't remember the name of the stuff now. If you paint strip, the etch prime, which contains a very mild does of that acid, will leave a coating on the steel, and it will be less susceptible to rusting than sanding it. ever noticed, a car thats had a big scratch put in it, the scratch rusts, but a car thats had a chunk of paint flake off, usually from dents, often hail damage, doesnt rust. thats the effects of the acid. Â Cheers, Andy Quote Link to comment Share on other sites More sharing options...
love ke70 Posted December 16, 2012 Report Share Posted December 16, 2012 diff, hilux if you want strong. more details, if its a serious question, maybe a new thread. anything can be made to fit... Quote Link to comment Share on other sites More sharing options...
madkp61 Posted December 16, 2012 Author Report Share Posted December 16, 2012 thanks for your help,diff wise hilux diffs are exspensive here, ive heard you can ise a r32 skyline one??? Quote Link to comment Share on other sites More sharing options...
ke70dave Posted December 16, 2012 Report Share Posted December 16, 2012 R32 = IRS ke30 = live axel. Â Not sure how you would use an R32 one. Quote Link to comment Share on other sites More sharing options...
It's_AUDM_Yo Posted December 16, 2012 Report Share Posted December 16, 2012 There is bloke round somewhere that put a S13 rear end in a KE70. But there is a serious amount of fabrication involved in this. Â So the r32 would be possible I reckon but its not a basic swap in the slightest. Quote Link to comment Share on other sites More sharing options...
rian Posted December 17, 2012 Report Share Posted December 17, 2012 theres a product, or a few on the market, that once you go to bare steel, you treat it with. contains phosporic acid. stops the steel rusting for a few weeks. i  Most rust converters are phosphoric acid, some are tanic acid. Quote Link to comment Share on other sites More sharing options...
madkp61 Posted December 17, 2012 Author Report Share Posted December 17, 2012 Sweet, so what diff will be a straight swap/not to much moderfacation involved?? Quote Link to comment Share on other sites More sharing options...
love ke70 Posted December 17, 2012 Report Share Posted December 17, 2012 maybe your thinking R31. but thats more common in a KE70. Quote Link to comment Share on other sites More sharing options...
madkp61 Posted December 17, 2012 Author Report Share Posted December 17, 2012 Oh properly thanks!! Quote Link to comment Share on other sites More sharing options...
B.L.Z.BUB Posted December 17, 2012 Report Share Posted December 17, 2012 Just sell me your KP61 and you can have my 4AGE KE70. Sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.