glenpos

G'day, i got the mini spool in yesterday, it was allot easier than i thought it would be "y" got a pic of the floor nearly done, and got a vid of it running. http://www.youtube.com/watch?v=xDipmzFbPSI&feature=youtu.be i'm going to the funday on saturday for some practice and i can take a few family members in it, then racing it on sunday :D

yeah it sounds pretty good, nice and loud, its very responsive, i didn't bother getting a video as i'll get heaps on saturday and sunday :D

hey, made a side pipe today, and put some race stickers on it, also spent 4 hours get the left over tar off the floor with paint thinner haha, also picked up some lowered king springs for $40 OMG I CAN'T WAIT TO DRIVE IT, I'm SO EXCITED :D hahaha

G'day, i got the rest of the tar off, ended up being 15kg, and fixed the power steering line that was flat :D also my mini spool turned up :dance: can't wait to drive it hehe

yeah iv'e disconnected the airbags, just gotta get a steering boss, and i'll be pulling the aircon etc out eventually but for now i might leave it in, not actually sure if i'm allowed to take the heater out, all it says in the regulations is that you can put a window demister on the front window, but i might leave it in anyway coz its so bloody cold haha

yeah haha, its cheap, and basically they were the stickers i had lol

G'day, i had a bit of a play today, i removed the towbar yesterday, and got all the rear tar off today, it weighs 6.3kg :o i also pulled a fair bit of the dash out to save some weight, and fitted the gear stick boot, and put some stickers on it, also got it sitting nice, and painted the rear spoiler :thumbsup: and mounted the camera :D did a few other bits but i can't think haha i think its looking pretty good, iv'e got a race on july 8th which is 1.5 weeks away, its at winton hopefully it will go good :rolla:

yeah haha, i think there is a series 1 and 2 so make sure you get the correct bell housing :D

goes pretty good, i think a t5 bolts in a vr, the vt ran a getrag but it shouldn't need mods for a vr, would be fun :D

hello, i got my flywheel, its all fitted i had to buy a clutch plate, finished putting the t5 in tonight, took it for a spin hehe :D heres some pics of the conversion :y: modified the clutch from hydraulic to cable hope you enjoy :y:

i have one of them, it turned to shit after a while, so i just use it as a putty gun haha, hopefully it will work well for you

hey mate, i welded the diff in my gze ke70, its fine, iv'e ripped lots of skids and thrashed around the track heaps, still works fine haha, motors looking sweet :y:

looks sick mate, i was pulling the t5 out of my car yesterday, had the front on ramps and rear on stands, it was a bit unstable, i was waiting for it to fall but it didn't haha, can't wait to see this thing done :D

hello :D i put the struts in yesterday, and rear springs, some how i managed to pick the 1 car out of about 20 that had higher rear springs than standard :/ my flywheel showed up today :D its pretty cool haha, i also got the t5 out of the vn, its got a good pressure plate, i just need a new clutch plate, then i can put it in the vt, i'm going to watch some saloon cars at winton on the weekend, hopefully i can get some more info :y: flywheel, better be good for $400, it's the one i need though because its t5 to vt 8 bolt. hope you all enjoy :)

looks good mate, spoto a hr wagon :D

they run the v6, you can do a fair bit of work to them, heads can be shaved to 54cc with one type of piston or 50cc for the other, ECU, and heaps of little bits i can't think of, i think they hit a touch over 300hp, they run on E85 too

thats sick as man :D

G'day, iv'e pulled out the carpet, started to get the tar off the floor, i went down to Healesville for the weekend helping dad paint my cousins hr, i went to the wreckers and got some front pedders sports ride struts for $90 a pair, i also got rear springs, here's some pics :D crap pic, i'll get some in the daylight when it's out of the shed haha strut after a clean :D the hr after allot of hours of body work :D and after :D i'll put the struts and the rear springs in tomorrow :D

hey mate, looks awesome, i like what your doing with it, nice set of wheels and a bit of a flashy motor would look great :y:

G'day, i got the tires on the mags, and mounted the spoiler, i have to take the spoiler off and paint it but i just wanted to see what it looked like haha, it needs lowering at the front, and springs for the back because its held up by jacks haha, looks pretty good though. still have to strip out the front but haven't had time yet. i'll probably do some more work tomorrow :y:

i think its only got the airbags and lines, nothing else, i might hang onto them for a while, iv'e got a mate that might want them, if not ill send u some pics, cheers :y:

i saw this on ebay haha, should be good fun when its done :y:

they are missing the pump, where are you from?

G'day, i thought i'd start a thread for my vt racecar, iv'e had it for a few months now, i picked it up for $1200, it has been resprayed about 6 months ago, the clutch was effed, but i had to pull the gearbox out anyways because i have to run a t5 in the series i'll be going in, this is the site for what I'm aiming for www.vicsalooncars.com.au.htm . i have started stripping out the interior, i picked up some 17x8 mags for $100 off a mate, i have to run 17x8s in the series, i'll race it in the sprint series at winton till next year while i'm building it for saloon cars, then ill sadly sell my ke70 race car :( to buy the expensive bits to get me into the series :) list of bits that i have to have for saloon cars: cams approved roll cage that i'll build myself, ss front lip, 235/45/r17 bridgestone potenza re11s type RH semi slicks, xtreme flywheel i'll order some time this week, fixed back race seat, a mini spool, and a fair bit of work to the motor but i can't think of what atm, i have to run certain suspension, that's all i can think of for now hahaha, they usually cost about $20,000 to build but as I'm building it myself i'm trying to do it for $8,000 haha, EDIT: more like $12,000...... here's some pics anyway :y: it had fully sick (NOT) airbags in the back that i'll sell to get the springs i need:D the clutch haha :D got a ss spoiler from pick a part for $40, i need it for saloon cars lol mags look much better in real life haha cheers hope you all enjoy :D

G'day, iv'e been doing a bit of work on the 12r head, iv'e got it pulled apart, i'll port it when i borrow my mates die grinder, then i'll get it shaved, here's some pics anyway :D here's the type of carbs i'll be using, they are off my dads dragbike, so i can make it all then when i have the spare money i can get some :D nice and smooth :D hope you like it, cheers :y: