Jason

does any body know the size of the oil sender thread for a gze Ae101? I'm getting my gauges hopefully tomorrow and i need to know what size sender i need.

No no this is a dish :P

Cut out the face plate almost finished just have to sand it to make it flat, i think the bottom lip is a little high (it has jumped up it photo though)

Bord out of my Fuc*king brain right now so i decide to upload these. Custum Dash Brackets teddy and i manged to get away with a 1mX20cm piece of 5mm thick aluminum from SIMs. I'm making the back plating for the oil temp and boot gauge out of it, as well as filling in the space were the T18 dash doesn't fill up. The EGO read out and shift lights will go along the bottom. I have the space so what the hell i might aswell do it. 3 progressive stages so i will be able to set at at EG 7000, 7500 and 8000 main lights come on once it hits the optimum RPM. o crap I'm tired but i can't go to bed, riding around flat out on my bike for 2 hours around aspley caring 50kg more, of broaches/catalogs really does its thing :dry: o well i get the $$$ for it. Horry $90 this week

You would probably have to discharge/unhook the back up battery (like computer ones) They can last for weeks :/ But i don't know how ECU cmos works :)

Ill do it for you :)

could it be a ground? sounds like a dry joint check it on the dials. Dry joint check - start hitting it for 5 mins and see if it turns on when you bash it. Is it old wiring? That is most the case with soldering/wires over 15 years old - looks at my many failed atempts at my immobilizer -

As i said before it might have gone around the clock

Hahahaah giggle gas only for show

Is it your number plate? I think teddy had that problem with one of his familys car

because you know your only going to have to spend more money getting another thing you just threw off the desk in rage after you computer crashed with my assignment after finishing a 1500 word essay :pcsmash:

Thats it I'm getting my CAMS!! :D ahh crap i need a _working_ car 1st :)

Simple leaver? I'm sure you can would that out

teddy u just ruined a perfectly fine thread :dry: hehehehehe jks

down hills fun, but I'm sure u have access to some mechanical (have to be more pacific from now on :) ) got a small butane torch? just solder the wire on to the catch

Ive looked at how the work very simple, u just need to attach one end to the lever inside the mechanism and the sleeve over the outside bit (you will see what i mean) and run a cable to a lever. g0t bike cable? But I'm sure you could get one from a wrecker?

If your not driving do u have to pay :) although i wish i was!

:) I'm lost rAndoM?!?!?

holy crap i watched that as a kid!!!

Get it running ok ?

good point

i know buts its a start, phh I'm just gonna put it towards my suspension, probably wont here it over the exhaust :P

Wow that would suk.. and some now some guy been staring at my car for a good 10 mins wtf :P

roflcopters :P

Well mum says she give me the value of my sisters camera and mini PS2 :P