Evan G

beware they are a CUNNNNNNNNNNNNNNTTTTTTTTTTTTTTTTTTTTTT TO DO!! i took me like 3hrs to do just the front, tons of crc was used and swearing, i can show you the trick i used

thats not too badd, i paid $220 for screen $100 for rubber and $14 for front and rear chrome strips from auto one . they sell it $5 meter ($3 tradies discount! :P) , you need 5/6 meters

how much did you get quoted for the front screen?

have you been for a roady yet?

The largest ball of twine built by one person is in Darwin, Minnesota. Francis Johnson built a 17,400 pound, 13 foot in diameter, ball of sisal twine in 1950.

acl sell pistons/ rings, hastings also sell rings, endurotech also do pistons. can't remember about bearings

let rust and old age ruin corollas not engine conversions

turbo 4k/5k with a trimatic and a big stall converter should be fun, if they tow around big holden boats they call the HQ they should be fine behind a 4k/5k

what trev is suggesting is also possible as ive done it myself

happy birthday champ!

another thing i can think of is the difference between the 4k and 5k clutch/pressure plate/flywheel wait till taz_rx or philbey replys.

if you pull on the clutch fork does do you kinda feel it move slighty?

i had the same problem with my ke55 when i put a new clutch cable in it, step on the pedal and goes to the floor, i had to use a 10mm spacer between clutch cable and were it meets into the side of the engine. try put a tempory spacer (like a small hose clamp) between ^^^ engine and clutch cable. or even pull of the clutch cable and see how much it moves before it gets tight?

you didn't put NOS energy drink in the fuel did yah? :P

+1 for fuel

it makes sense! ive always wondered why taz_rx runs a 3kbp head on his 5k turbo at the end of the day it all comes down to combustion camber CC

theres no holes in the new carpet for like the seat belts or the seat rail therefore have to make your own, Ive heard there not very well moulded in slo-30 opion

no no, we got this fella at work who is a little DURRRR is the best way to put it, he came up to me and asked it i would look at a problem he had on his truck, walked over there and he was asked if he should tape up some negative wires exposed from the battery, i told him don't worrie its just negative. and then his like what happens if it touches something and short circuits? i told him don't worrie and walked off, so we went and ask one of the auto elecs (who's a funny f@$ker!) and the auto elecs said "yea you better tape it up just in case the negative short circuits to earth, oh while your there tape up the battery post" and he fella was like "shit lucky i saw that" and taped the wire and the battery post :lol: :lol: :lol: :lol: :lol:

looking good re! coming on the kinglake cruise? 17/10/10

wgmg - negative short circuiting to ground :bash: (I'm boreddd :lol:)

was expecting that :lol:

love you reed :P:

O'DOYLE RULES!

were going up it so tow rope it is :D (i havent been up there before)

nah mate, my brother is a dam P plater aswell :P