toyrota

Yeah it would look heaps better painted in faded rusty orange like your 120Y Gaymobile :)

The guy's daughter wasn't born when he built it!

What are you thinking using square U-Bolts? they are meant for square trailer axles not round diff housings..

If you run an RX4 bell housing you wont need to change to 9.5in clutch. So for an extra 200 or so bucks plus a bellhousing u'll know you wont be walking home when you're 30 yearold box craps itself

You need to cut about 2 to 2-1/2 inches deep out of the x/member so the sump will clear. and then put the strength back in with a few braces and some plate. i'll try to find some photo's of mine when i made it and put them up.

don't waste you're time with a 12a, get a 13b. especialy if you're going n/a. u'll want a series 4 RX7 turbo gearbox with an RX4 bellhousing. These are a realy strong box and are fairly big but you wont break one. you shouldn't need to cut you're firewall either. i didn't in my ke55 and you would think a t18 would have to have a bigger tunnel? you will probably need to cut a fair chunk out of you're x/member aswell to get the motor sitting a bit lower and further back.

Sorry fella's. i meant something more around the $500 mark. 0407 349 635

I'm after something cheap to drive to work. prefer Datto 1200sedan/180b/200b, corolla or similer. (NO 120Y's) tho. must be still in reg and not half rooted because i can't realy be stuffed working on it. prefer in the Launy area.

hey people. i'm still after a chrome bonnet strip for a ke55. i need the skinny one piece one off the 80 model tho, not the big ugly one off a 79 model. must be in prime condition tho. thanks.

here's a couple of pics

nah it wasn't that that snapped the shaft. i'll have to show you how it happened.

did you get the undersized supercharger pulley with the car when you bought it?

point taken.

ooooops sorry. I'm only offering this item to my two headed brothers and sisters in Tasmania. could you kindly move this thread back to the Tassie section? Thanks

8in round 16in long 2-1/2in inlet 3-1/2in stainless dump this isn't a cheap Ricey look cannon muffler, it's a genuin Rotaflow. heavy duty design with stainless packing. looks tuff as. only selling because i need 3in straight through. It's only about six months old. They are about $400 new but am willing to sell for $150 0407 349 635

no worries mate. how is the old girl goin? i've got a bit of a vid of my old ke30 with that motor in it before i sold it. i'd post it up but i don't no how. mine is coming along pretty well, a few more weeks and it should be painted. then i've got to put it all back together :D

I've got a cooler that will fit perfect in the front of a 30-55 Rolla if anyone needs one. i've had it fitted to mine but got something a little bigger now. it's brand new, few scrathes but nothing that wont buff out. $250.00. i'm in george town. Good upgrade for the dude that has my old red 4agze KE55 0407 349 635

i'm always nice. are they the same as 55? 55's are a 3 piece strip.

How ya's all doin? i've been looking for the chrome strip that goes accross the front of a ke55 bonnet for f@$king ages and can't find one anywhere. i'm after the later model 55 one with the thinner strip, not the big gay one the 79model has. has to be in pretty good condition tho.

true. i bypassed mine while fitting the front mount and there was no noticeable affect on throttle response. maybe if you was running a big f@$koff truck cooler then yeah, might be a bit of lag. but not a series 4/5 rx7 cooler or something a bit bigger. your never gonna make enough power out of a supercharged 4AGZE to need anything bigger than that anyway.

why don't you just get rid of the stock top mount? they are shit anyway, they have realy gay thin tubes and don't flow very well at all. i have one that fits perfect in the front of my rolla you can buy.

1. SHOOT THE DOGS. 2. BURN THE GRASS. 3. BASH THE OLD MAN WITH A HAMMER AND STEAL HIS COIN JAR. 4. BUY YOUR KIDS CRF450'S

does she have a boyfriend? i think she could be the one, mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm mmmmmmm the one!

well my engine bay is finished. it looks horny in real life, the sun realy brings out the coulour it's got heaps of gold in it but you can't tell from the pics and its more orange than in these pics.

this might sound stupid but i just bought a booster out of a ke36 van to do a pajero master cylinder conversion. are they the same as ke35?