love ke70 Posted June 13, 2010 Report Posted June 13, 2010 before or after you open them? i hate it when u buy a flat one. Quote
Evan G Posted June 13, 2010 Report Posted June 13, 2010 before or after you open them? i hate it when u buy a flat one. after like 10mins of opening it! i opened it, had a sip. finished off my nandos chicken and dead flat! wtf! Quote
Jason Posted June 13, 2010 Report Posted June 13, 2010 Its call carbonisation.... and I tail gate, gtfo of my way... Quote
7shades Posted June 13, 2010 Report Posted June 13, 2010 Its call carbonisation.... and I tail gate, gtfo of my way... You're not in the Volvo anymore... You can't scare the little cars :P Quote
Felix Posted June 14, 2010 Report Posted June 14, 2010 Freaking tight bolts. :P Changing the dogbones on my E32, one of the bolts was off the scale on my torque wrench (reads to 150 foot/pounds) and still wasn't budging. Luckily I remembered I had a 4 foot long piece of pipe floating around. Slipped it over a breaker bar and it undid, but was still tight. Whew! Also jacking up my E32, what a pain in the ass. The car is so low that there was only like 2 inches between the jack handle (fully down) and the fuel tank. Prick of a thing to jack up the rear of the car. Quote
Hiro Protagonist Posted June 14, 2010 Report Posted June 14, 2010 Freaking tight bolts. :P Changing the dogbones on my E32, one of the bolts was off the scale on my torque wrench (reads to 150 foot/pounds) and still wasn't budging. Luckily I remembered I had a 4 foot long piece of pipe floating around. Slipped it over a breaker bar and it undid, but was still tight. Whew! Also jacking up my E32, what a pain in the ass. The car is so low that there was only like 2 inches between the jack handle (fully down) and the fuel tank. Prick of a thing to jack up the rear of the car. Sill-jacks weren't a option I guess then? Quote
Felix Posted June 14, 2010 Report Posted June 14, 2010 Sill-jacks weren't a option I guess then? That's where the car stands go. I wouldn't feel comfortable under the car unless it is supported by at least pair of decent carstands and a jack. Need to get one of those big mofo low profile jacks. Quote
Xany Posted June 14, 2010 Report Posted June 14, 2010 That's where the car stands go. I wouldn't feel comfortable under the car unless it is supported by at least pair of decent carstands and a jack. Need to get one of those big mofo low profile jacks. I'm on the lookout for a workshop jack myself....i'll let you know if i find any at a decent price. :P Quote
ninja-philbo Posted June 14, 2010 Report Posted June 14, 2010 i got one from superdear isnt to bad.. wgmg is gettin pulled over twice for rbt in 5 mins never driving the missos falcon again she never gets pulled up. Quote
Hiro Protagonist Posted June 14, 2010 Report Posted June 14, 2010 That's where the car stands go. I wouldn't feel comfortable under the car unless it is supported by at least pair of decent carstands and a jack. Need to get one of those big mofo low profile jacks. I was implying that you jack the rear of the car up a few inches on both sides with the sill jacks, then get the trolley jack centred and take the load. Don't BMWs have seperate jacking and stand points though? They have those funky discs on the side of the sills themselves, and then the pads on the underside of the body? Quote
Felix Posted June 14, 2010 Report Posted June 14, 2010 (edited) I was implying that you jack the rear of the car up a few inches on both sides with the sill jacks, then get the trolley jack centred and take the load. Don't BMWs have seperate jacking and stand points though? They have those funky discs on the side of the sills themselves, and then the pads on the underside of the body? LOL, yea I figured you meant that after I made my post. I'll try jacking under the sills a bit next time. I guess the factory jack on one side and my small trolley jack on the other would get it up that first bit to allow me to swing the handle of my larger trolley jack. The car has massive rear overhang. Mine doesn't have the discs on the sills like you see on the later cars. Didn't notice the pads under the car, will have to have a look. Edited June 14, 2010 by Felix Quote
philbey Posted June 15, 2010 Report Posted June 15, 2010 Freaking tight bolts. :P Changing the dogbones on my E32, one of the bolts was off the scale on my torque wrench (reads to 150 foot/pounds) and still wasn't budging. Luckily I remembered I had a 4 foot long piece of pipe floating around. Slipped it over a breaker bar and it undid, but was still tight. Whew! Also jacking up my E32, what a pain in the ass. The car is so low that there was only like 2 inches between the jack handle (fully down) and the fuel tank. Prick of a thing to jack up the rear of the car. Yeh getting my 911 off the ground enough to work on is difficult too. It's got the sill jack points though but I need the little insert that goes into it. Worst thing is that the old 911's have two oil lines running just inside the sill and dickheads jack it there and crush the 600 buck oil lines!! Quote
Felix Posted June 15, 2010 Report Posted June 15, 2010 Worst thing is that the old 911's have two oil lines running just inside the sill and dickheads jack it there and crush the 600 buck oil lines!! Ouch! That would suck. I've said it before and I'll say it again. WGMG's is the cost of some parts locally. The power steering pump shat the front seal. Rang around for a second hand unit... Looking at $200 (or more) if you can find one, mine is a harder to find early one with hydraulic brake boost. Too scared to ring up BMW. Ended up getting a rebuild kit from the states for $45 AUD delivered to my door. :P Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.