February 19, 200917 yr Author comment_320325 Hey, Yeah alot to go. No i havnt picked a colour yet..... theres are few i like but depends I'm waiting on samples. got a few in mind. i'll let you all know soon enough! Report
March 22, 200917 yr Author comment_330171 Hey Guys Lots of News, Well first things first. Had a car accident and totaled the KE70. Then whilst going to pick up a car trailer within 3 and a half hours the KE70 Got stolen!!! :P Lost 2 of the boyfriends drayway rims and his car, that I now owe him. kicking myself!!!!!!!!! Report
March 22, 200917 yr Author comment_330177 Slowly More Work... Bonet Warped When Paint Stripping. Also filled in all badge holes and Antena Holes. As Usual back right hand qaurter panel is rusted out completely. gotta borrow a mig to fix that soon. I have picked a sky blue metallic, it's by protec paint. looks awesome. Edited May 22, 200917 yr by nyxvampire Report
March 23, 200917 yr comment_330294 Damn... sorry to hear about the ksev. Who steals a wrecked car?? lol That bonnet sure is warped. Bloody hell how long did you keep the paint stripper on for?? Report
March 23, 200917 yr Author comment_330308 Well I sanded the bits I could which apparantly is pretty bad for it anyway, then put the paint stripper on for maybe... half hour then hosed off with a pressure washer. Primed it then went arrr... shit. so yeah sucks ass. havnt seen many bonets the same though, well where i am from anyways, but gotta find one. Edited May 22, 200917 yr by nyxvampire Report
May 22, 200917 yr Author comment_346706 Hey, Just been migging up some holes. Just gotta grind back into shape. Report
May 22, 200917 yr comment_346710 did u just use mig wire (or filler rods or whatever it is) to fill in the holes and whatnot instead of replacement sheets, that would be a mad idea if it actually is what you did :D Report
May 22, 200917 yr comment_346759 We just used replacement panels. I cut the rear wheel arch section out of one of my cars for her, and then they just tacked them in with the mig. It is the easiest way to do it. Looks good though babe. Coming along slowly but surely. :D Report
June 14, 200917 yr Author comment_352100 Hey Guys, Corollas still going slow .... :yes: I get my P's back on the 18th of this month so I bought a new car to drive in the meantime. 1980 200B Datsun. Nice and clean, extremly well looked after. Cheers. Report
June 20, 200917 yr Author comment_353612 Hey, Grinded back the wield and made smooth. Finally found a good passanger door so I can now get rid of the rusted one. As you can see, I'm still working on that rear corner. Last time we had a go at it with the fibre glass and bog... This time we got rid of that and actually tried weilding it. Now we just gotta work on getting it smooth. LOL! See, The new Ford Festiva panels can come in handy... :bash: used it to mend the rear quarter. Painted the subframe black. Soon we shall be painting the engine bay dropping the 4k back in so it's easier to take it to the spray booth. Found Some of dads parts lying around the shed... should I put this stuff in the KE55??? 4 Link 9" 31 Spline, Full Spool Centre out of an ex Pro Stock car. I should find some GT35 Garrets to go with it what do you's reckon? Cheers. Report
June 22, 200917 yr comment_353992 Looks like a great idea... By the time you experiment how it goes in the Ke55, find some engine mounts, experiment with a few bonnets to cut open holes with, find a tranny to go with it, get some new sheetmetal for the tranny tunnel, custom make or buy a tailshaft/driveshaft, experiment with the diff, custom exhaust system, maybe a new steering rack, find a new crossmember for the engine or the gearbox to sit on, and get an engineers ( if you want to get one ). :D I reckon maybe go for simple 5k or 4age or any other Toyota Twin Cam engine there is, a Nissan ca18det or sr20det, or you could rebuild and work the 4k sittin' in it now and slam a 5 speed behind it. But it's not my choice as to what you do to this beast. I'm just puttin out ideas for what you could do to this. Cheers, Josh :bash: Edited June 22, 200917 yr by ewt Report
June 22, 200917 yr comment_354059 Looks like a great idea... By the time you experiment how it goes in the Ke55, find some engine mounts, experiment with a few bonnets to cut open holes with, find a tranny to go with it, get some new sheetmetal for the tranny tunnel, custom make or buy a tailshaft/driveshaft, experiment with the diff, custom exhaust system, maybe a new steering rack, find a new crossmember for the engine or the gearbox to sit on, and get an engineers ( if you want to get one ). :) I reckon maybe go for simple 5k or 4age or any other Toyota Twin Cam engine there is, a Nissan ca18det or sr20det, or you could rebuild and work the 4k sittin' in it now and slam a 5 speed behind it. But it's not my choice as to what you do to this beast. I'm just puttin out ideas for what you could do to this. Cheers, Josh :D I think she may have been joking lol :bash: Report
June 23, 200917 yr comment_354263 I think she may have been joking lol :) Yeah I know. I was just sayin' that if she did go ahead with this idea, they would be the things she'll have to do to these types of rollas. Report
June 24, 200917 yr Author comment_354436 Hey, I know very well about the work involved in any conversion. I would love to put them in there one day. but not for a looonnnggg....... while. I am going to rebuild the 4k maybe put a tiny little turbo on it. for the moment the engine bay is being sprayed so I can put the engine back in and that way its easier to take it to the spray booth. Report
June 24, 200917 yr comment_354442 don't worry too much about damaging the ke70. I found that corollas don't like going upside down. :) Just thought id let you guys know as i remember you were a fan of her as was I. RIP my girl Please see my thread here: RIP ol girl Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now