April 23, 200818 yr comment_241437 PIcs of the distributor set-up would be great if you can get them :hmm: Report
April 23, 200818 yr Author comment_241442 PIcs of the distributor set-up would be great if you can get them :hmm: no worries. will get some tonight and put them up tomorrow Report
April 23, 200818 yr comment_241454 have you thought of getting the extractors ceramic coated instead of wrapping them? Report
April 28, 200818 yr Author comment_242538 pic of the distributor with the extractors. havnt got it started yet. its not getting spark :lolcry: Report
April 28, 200818 yr comment_242545 I doubt you'll have much tuning it with a screwdriver :lolcry: But the last owner probably had the jets and chokes set right at some point. What's the deal with the ignition? Doesn't look like a standard dizzy, is it on points with mech or vaccum advance, or is it on an electronic module? Report
April 28, 200818 yr comment_242549 havnt got it started yet. its not getting spark :lolcry: is the rotor button spinning? is there power at the coil? is the coil receiving a negative signal? Report
April 28, 200818 yr Author comment_242561 I doubt you'll have much tuning it with a screwdriver :lolcry: But the last owner probably had the jets and chokes set right at some point. What's the deal with the ignition? Doesn't look like a standard dizzy, is it on points with mech or vaccum advance, or is it on an electronic module? I'm prity sure its mechanical advance. not 100% tho. is the rotor button spinning? is there power at the coil? is the coil receiving a negative signal? i think its not getting power at the coil Report
April 28, 200818 yr comment_242575 i think its not getting power at the coil if your not getting any voltage at the coil run a wire directally from the battery. if it starts sparking then theres obviously a fault with your wire. Report
April 29, 200818 yr Author comment_242773 if your not getting any voltage at the coil run a wire directally from the battery. if it starts sparking then theres obviously a fault with your wire. ran a wire from the battery last night and it sparked. looks like I'm going ova all my wiring :lolcry: :wink: Report
May 17, 200818 yr Author comment_247001 k. so. went over all my wiring, changed all the fuses still nothing. got at everything with a test light and found the problem THE f@$kING IMMOBILIZER its not leting power get to the coil. ima rip the piece of shit out should be started soooooooooon!!!!! Report
May 19, 200818 yr Author comment_247334 k. got the immobilizer sorted. ive got power going to the coil now but its still not getting spark to the distributor... can anyone shed some light? Report
July 28, 200818 yr Author comment_264151 UPDATES FINALLY!!! had a mechanic mate come around and have a look yesterday. needs new leads and new spark plugs, wiring was a bit jumbled and there was a few other little things. fingers crossed it will be started next weekend. one small problem tho is the carbs arnt getting fuel :S theres pressure and the pump is working fine. Report
August 11, 200818 yr Author comment_267533 i have picture updates!!! still waiting for new leads to arrive, i got bored on the weekend so i put some coloured LED globes in my dash, and cleaned up all the wiring in the engine bay and took out the charcoal canister. pics: dash wiring clean and hidden Report
August 18, 200818 yr Author comment_268774 got the new leads. they look good imo and its now sparking on all cylinders. carbs still arnt getting fuel tho Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now