Today at Lonsdale UPI spotted a few corollas

 

1x KE30

 

1x KE55

 

1x KE70

 

1x AE71

 

and a few xt130 coronas too.

Yesterday at UPI Elizabeth:

 

6 or 7 KE70 slanty and flat fronts, 1 wagon. Plenty of complete 4K's!

 

2 x KE30

 

2 x KE55, 1 hardtop auto

 

1 x KE38

 

One of the KE30's had an awesome centre console in it and there were plenty of good interior bits there

any xt130's at elizabeth?

hmmm.. if anyone comes across a set of shanked bevel wheel nuts for Nissan thread I'd love them. They stick into the alloy wheels with a 17mm diam shank, not the big 19mm ones on Commodes and Falcoons. The shoulder or washer has a bevel on it for the countersunk wheels, not the flat washer, and the thread is 12mm by 1.25 pitch, not the Rolla's 1.5 pitch... I found every other option at the local wreckers!

So anyone seen anything of interest at the northern yard? Looking for mainly ke70 stuff

Last time I was out at North Yard there was stuff all in the way of KE70's or any other Corolla stuff

I was at the northern yard today. 4 ke30/55's (one of them a 2 door), a few ke70's and a twin turbo soarer with front end damage, turbos and exhaust manifold gone (surprise surprise)

Grab them while they are still there!

KE38/36 wagon still there?

KE38/36 wagon still there?

 

Yeah wagon is still there Ryan, wasn't much on it though...what do you need? Worth the trip though - there were 4 or 5 3x and 5x rolla's there last week.

 

Cheers,

Tom

hmmm.. if anyone comes across a set of shanked bevel wheel nuts for Nissan thread I'd love them. They stick into the alloy wheels with a 17mm diam shank, not the big 19mm ones on Commodes and Falcoons. The shoulder or washer has a bevel on it for the countersunk wheels, not the flat washer, and the thread is 12mm by 1.25 pitch, not the Rolla's 1.5 pitch... I found every other option at the local wreckers!

 

There's a place here in Adelaide called 'performance industries' they may be able to help you out, I got the wheel nuts for my dragways there. Here's their details: www.performancewheels.com.au and 08 8294 9455.

that soarer has a 1jz in it! was semi keen to get it out!

It might just be me but I would NEVER buy an engine from U Pull It.

 

All that time and effort pulling it out, and they still aren't that cheap. What's the chances it will actually work after all that too :fuzz:

i got a 5k from upi lonsdale. the car i pulled it from was defected. had a compression test done later on and it had 180, 180, 180, 180. never blew any smoke and ran beautifuly.

 

i guess i just got lucky :)

Not sure if this link has been put up before or not, but I've found it to be very accurate in the past...

 

UPULLIT Stock Listings for Northern and Southern Yards

http://www.upullit.com.au/results_page.asp

Anyone seen a KE70 front bumper bar in good nick around the place? These things are alot harder to find then I thought.