hosedogg Posted March 3, 2010 Report Posted March 3, 2010 (edited) Hey everyone. Have recently just left a deposit on bezenders ke36. And will be picking it up within a few weeks :yes: thought I'd chuck this up now as I'm bored ATM lol. Anyways will update as things go along. Plans are gettig running a1 and intercool I and later on efi. After Nikki gets her full license we'll upgrade it to a 5kte :hmm: but ATM we gotta get an approval for her to drive a turbo car as it is. And that will stick to the engine number and car that it is now. Pics will go up later as on my phone now. Matt Edited October 12, 2010 by hosedogg Quote
hosedogg Posted March 3, 2010 Author Report Posted March 3, 2010 Lol thanks mate :yes: gonna be pretty sweet having two ke36 wagons :hmm: will most likely using a intercooler of an xr6t. Carter fuel pump that's coming with the car we'll be using as a lift pump to a surge tank then using a vlt fuel pump out of my vl as it needs upgrading anyways lol. Then take it to websters and see how much boost we can push through the 4ktc >| Quote
seabiscuit Posted March 3, 2010 Report Posted March 3, 2010 (edited) Then take it to websters and see how much boost we can push through the 4ktc :hmm: Unlimited! That's heaps cool man. Kind of jealous right now :yes: Still coming to cruise!? Couldn't reply to your messages... My phone broke and couldn't get any numbers back out of the darn thing >| PM me! Hope you get this on the road soon! Will be awesome for you to be able to drive one of the KE36's. Edited March 3, 2010 by seabiscuit Quote
hosedogg Posted March 3, 2010 Author Report Posted March 3, 2010 coming to canberra this weekend to pick up the purple 36 :yes: i'll pm you for details on said cruise, want to try and take the purple 36 on the cruise :hmm: Quote
hosedogg Posted March 3, 2010 Author Report Posted March 3, 2010 (edited) lol, so just pull the wastgate line of the turbo then :yes: free boost it? haha. i'm wanting to push like 20psi through the little banger, then go eat some commodores :hmm: also here are the pics i have so far. Edited March 3, 2010 by hosedogg Quote
Taz_Rx Posted March 4, 2010 Report Posted March 4, 2010 You can run 20psi on that turbo,...... but don't expect it to last longer than a week. The 360 degree thrust washer turbos will only like about 15psi max. The shaft speed required for 20psi will just fly out the bearings. Basically you need a ball bearing turbo if you want that sort of psi...... same drama I have at the mo. Quote
LukeAE71 Posted March 4, 2010 Report Posted March 4, 2010 Good luck with this car >| I don't want to be all negative but this has been through a few owners here in Adelaide with not much success at running all that well :yes: I hope you can change the trend :hmm: Quote
Taz_Rx Posted March 4, 2010 Report Posted March 4, 2010 Yeah I've noticed that too...... although I don't think anybody has really put any research or effort into getting it running properly. No offence meant to him - but I don't think Benzeder even did anything to it....except for shitting a fuel pump,.....because the fuel system was not set up properly. Quote
Karllos Posted March 4, 2010 Report Posted March 4, 2010 I didnt think that there was much point in running an efi pump on a carby setup anyway, well i guess you have boost but the fuel system wouldnt be able to cope with the efi pressure and be able to release the built up fuel, i could be wrong.... Karl. Quote
Taz_Rx Posted March 4, 2010 Report Posted March 4, 2010 I didnt think that there was much point in running an efi pump on a carby setup anyway, well i guess you have boost but the fuel system wouldnt be able to cope with the efi pressure and be able to release the built up fuel, i could be wrong.... Karl. Yep you are!! :yes: Have a look at the "How to setup your fuel system" thread in the tech section if you're interested. Carby turbo fuel systems are more similar to an EFI setup than a conventional carby setup. Quote
hosedogg Posted March 4, 2010 Author Report Posted March 4, 2010 Well in that case si I might not turn it above 15psi on this turbo. And may have to invest in Garrett t28 of some sort see if I can get any with a 0.48 rear for the little 1.3 banger :yes: and your tech thread on the how to set up a fuel system will help me alot with this car :hmm: one other thing. For the wiring to the fuel pumps. Should I run them through a relay and fuse? Or just a fuse? And don't worry we'll be getting it running right for sure >| and hopefully shouldn't take to long either Matt Quote
Taz_Rx Posted March 4, 2010 Report Posted March 4, 2010 If you want a .48 rear then try and find yourself a T25G. Yeah mate, always run power for things like a fuel pump of thermo fan etc through a relay. I also used to run the power for the VL pump through a ballast resistor (just an old coil one) as well to drop the output a little bit. You don't need all of what that pump will put out for a carby K. It shouldn't take too long to sort it. Probably just the fuel system, but also make sure somthing has been done about ignition so you don't blow HG's. :yes: Quote
hosedogg Posted March 4, 2010 Author Report Posted March 4, 2010 (edited) Well really i think I'd rather a 0.64. Which I'm guessing this turbo on there now is? Wanna do it once and do it right with the turbo. Has to be enough to flow for the eventual 5kte :yes: also what would you recommend doing with the ignition system si? Edited March 4, 2010 by hosedogg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.