K Heads

[Pongwow!]

Quick question for you corolla eperts,, what k series head came out with the biggest valves?

Cheers

[Pongwow!]

?

[Trev]

I am no K motor man at all so I am probably wrong but I believe that the valves were the same but the ports were different.

[Pongwow!]

Yeh I'm pretty sure your correct but i heard that the 3kb head has bigger valves?

[flamingheads]

1) Knowledge Base/FAQ

2) Search

3) Google

4) ???

5) Profit?

Edited September 6, 2010 by flamingheads

[Trev]

1) Knowledge Base/FAQ

2) Search

3) Google

4) ???

5) Profit?

 

1.The FAQ does not have valve sizes in the head section.

2. Could not find anything that mentions valves for a K motor searching "valve size"

3. After googling, I found this:

 

http://www.toymods.org.au/forums/showthread.php?t=4365

 

valves, rockers, rocker shafts and rocke towers will change between the different heads.

 

If it had been covered better I would see it as being a waste of a thread but since there is SFA on it give him a break.

[irokin]

http://www.google.com/cse?cx=0084050981120...amp;x=0&y=0

 

--->>

 

http://www.rollaclub.com/board/index.php?s...st&p=213685

 

 

The forum search is quite frankly useless. Use the google CSE on the top left first, then you can try and do battle with the forum search.

[Redwarf]

From memory, early K heads : Big ports, small valves, then it went to big port bigger valves, and from that point they're all pretty much the same.

 

No real difference after the early K's.

[jono1986]

You could find out from a parts supplier couldn't you, find out the different part numbers and go from there?

[Taz_Rx]

From memory, early K heads : Big ports, small valves, then it went to big port bigger valves, and from that point they're all pretty much the same.

 

No real difference after the early K's.

 

+1 :rolls:

[Pongwow!]

From memory, early K heads : Big ports, small valves, then it went to big port bigger valves, and from that point they're all pretty much the same.

 

No real difference after the early K's.

 

 

Thanks matee :rolls: big helpp hey by any chance would you no from what year the bigport heads with bigger valves came out??

Thanks heaps again

[Evan G]

same year the die grinder was made :rolls:

[Felix]

Thanks matee :rolls: big helpp hey by any chance would you no from what year the bigport heads with bigger valves came out??

Thanks heaps again

 

The first 3k's around 1969 or so in the ke11/17/18 through the ke2x series.

[Pongwow!]

same year the die grinder was made :rolls:

 

 

Hahahahaha :bash:

[camerondownunder88]

Link:

 

http://www.rollaclub.com/board/index.php?showtopic=41899

 

Read my long post that is all.

 

Cameron