Ethan.ke20 Posted June 21, 2023 Report Share Posted June 21, 2023 (edited) Hi, wondering if anyone could tell me the length of ke20 and ke30 LCA lengths? (Centre of ball joint to centre of bushing) also want to know if a ke20 ball joint will fit into ke30 LCA? And if ke20 caster arms and sway bar link bolt in to the ke30 lower arms? basically wanna use the aftermarket T3 ke30 LCA’s in my ke20 https://technotoytuning.com/toyota/ke30/front-lower-control-arms-ae71ke70ke30-corolla cheers. Edited June 21, 2023 by Ethan.ke20 Quote Link to comment Share on other sites More sharing options...
Jono.C Posted June 21, 2023 Report Share Posted June 21, 2023 Ke20 are the longest of the Corolla lcas From memory ke20 is approx 325mm while ke30 is 310mm Unless they have a ton of adjustment they won’t be long enough and you’ll end up with positive camber. What’s the reason for wanting longer Lca’s? Just for camber? 1 Quote Link to comment Share on other sites More sharing options...
Banjo Posted June 21, 2023 Report Share Posted June 21, 2023 Haven't got any KE20 LCAs, but measured my KE30 LCA, & can confirm 310mm is correct. Cheers Banjo 1 Quote Link to comment Share on other sites More sharing options...
Ethan.ke20 Posted June 21, 2023 Author Report Share Posted June 21, 2023 The t3 aftermarket LCA’s extend 1.5” (38.1mm) so they should adjust enough to fit just wanting to run something aftermarket instead of stock LCA’s also need to find out if ke20 ball joint will fit into ke30 lca’s? or if I’ll have to get my steering arm lathed to suite ke30 taper ball joint Quote Link to comment Share on other sites More sharing options...
Jono.C Posted June 21, 2023 Report Share Posted June 21, 2023 From memory the ball joints will interchange Theyre not really a street LCA. There’s no benefit to them over the factory ones unless you’re just trying to gain wank factor 1 Quote Link to comment Share on other sites More sharing options...
parrot Posted June 22, 2023 Report Share Posted June 22, 2023 No the KE20 ball joint pin is smaller. Quote Link to comment Share on other sites More sharing options...
coln72 Posted June 22, 2023 Report Share Posted June 22, 2023 unless you run coil overs there isn't enough room in a KE20 strut tower to get any camber adjustment Quote Link to comment Share on other sites More sharing options...
Ethan.ke20 Posted June 22, 2023 Author Report Share Posted June 22, 2023 I’ve got t3 weld on coilover kit on my struts Quote Link to comment Share on other sites More sharing options...
Jono.C Posted June 22, 2023 Report Share Posted June 22, 2023 10 hours ago, parrot said: No the KE20 ball joint pin is smaller. Yeah the actual ball joints them selves although different size / taper are same size where they press into the arm Quote Link to comment Share on other sites More sharing options...
parrot Posted June 22, 2023 Report Share Posted June 22, 2023 2 hours ago, Jono.C said: Yeah the actual ball joints them selves although different size / taper are same size where they press into the arm True, the pin size wont be relevant will it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.