Jump to content

Tiger

Audiophile
  • Posts

    2048
  • Joined

  • Last visited

Everything posted by Tiger

  1. Was thinking that much... Now to find out whether that's legal or not.. Time to call up the RTA I think :D
  2. So you're saying to hack out the spare wheel well (to make it a flat floor and in place underneath, place the tank there?
  3. IF you plan to make a tutorial out of it.. a new thread in this section is fine.
  4. Has anybody attempted this? This is a legal practice, isn't it? And will it require engineering? I ask this because I wouldn't mind putting the tank UNDER the chassis to free up boot space and also have so I flip down the licence plate on the rear and fill up from there. The result... more boot space and smooth lines on the exterior
  5. Or... create your own design entirely :D
  6. More dish than a kitchen!!!! Very phat looking ride! :D
  7. OK, they have the aftermarket upgrade light bulbs and generally they only need a relay put on the older cars (87 and earlier) So, you'd be safe to throw them straight on, I'd say.
  8. Corona headlights on that one. VERY different. I'll agree he done well on the swap, it still has to grow on me though.
  9. Front lip I think. I don't recall side skirts or an actually rear spoiler being made for KE55's. 9 out of 10 chances is it would be a custom job by anybody acquainted with fibreglass.
  10. (subscribes to thread) THIS I gotta see! :D
  11. :D Uhm... yeah... that'd work! :( hahahaha Well, if you don't smoke.. loose the ashtray and if you can find another spot to use the toggle switch for your rear demister... move it and then use that whole dash space for future gauge installation :(
  12. I'd be saying the Crank Angle Sensor would be rooted. If you're getting continuity from the computer end of each wire all the way to the back of CAS plug, then it ain't a dogdy comp. Just my 2 cents
  13. Show me some mammories and I'd temporarily forget about car audio FO SHO!!! :D I'm only human, you know :(
  14. Tiger

    Rust

    I used to bog my way through rust repair :D Now, Id rather do the cutout back to bare metal and replace it with sheet metal and weld the panel in place, grind off the excess and high fill the area.. primer over it then go sick on the paint. That's what I've been shown anyway... haven't come across any bad feedbck afterwards (shrugs)
  15. I think I'd embarass myself before anybody else! hahaha But yeah.. I've been tuning into Big Brother lately and I tell you what, I'm set to go for auditions! I don't give a rats what people think! :( Tiger's gonna go auditions the second it comes up! :( So let it be written.... so let it be done! :D
  16. Yikes! This one just grabbed my attention now! Nice project! :( I'm subscribing to this one. So you're basically going semi-sleeper approach. Nothing over the top in looks but a crazy conversion. You have my utmost of respect, buddy... and welcome to RollaClub also. (Forgive the late reply) :D
  17. ^^^^ That's probably the most cost effective way of going about it too :D
  18. Skidpan day is what I had in mind, but I think there maybe a slightly cheaer option than that. I'll do my research,
  19. You just bet me to asking you Nice work there! Nothing wrong with change or updating themes here and there. I was wondering what's been the latest with your ride, dude :D They should come up a trick. Good to see progress. I was gonna say about the first lot of pics Isaw today, don't tell me his car got broken into! :( But it wasn't the case. Its all good :(
  20. I would assume it would be a set of driving lights UNLESS he had a "fully sick uleh" undercar neon kit installed :D Who knows. If it's there... use it for whatever you guys want, whether it be driving lights you wish to install or a killswitch or something (shrugs)
  21. If you want, your best shot would be to give Crow Cams in Campbellfield, Victoria a buzz and let them know what you are after and they can quote you for a cam built to spec and postage.
×
×
  • Create New...