SLO-030

Sounds like you got it all planned out Jono. can't wait till the engine/suspension side of things kicks off :dance:

Bought the jets from Kent Town Automotive. Going back to points because ever since i put this leccy one in i've had flat spots, where the engine stutters for a bit. Not saying its definatly the dizzy, but its not going to cost me anything to have crack at it.

WD40 ;)

Thanks Tom. Chucked the new jets in earlier. Definatly made a difference. Went from 70/160 mains to 160/175's and from 140/140 air correction to 140/150. Alot smoother and can definatly feel the cam come on. Seems to lack a bit of torque down low that it used to have. Also going to put my points dizzy back in.

Bought some Jets for the weber yesterday. Hopefully chuck them in tonight and see how we go :D

If you hadnt already seen this on Toymods. JZT130 Edit: Didnt realise it was the FS thread.

Got your licence back Ryan? Get this 55 finished :happy:

Happy 21st Matt! :party:

Theres a U channel thats glued to the glass. The tab on the bottom of the channel attaches to the window regulator with 2 6mm (10mm head bolts). Just be careful as the tab on the bottom of the channel also sits in a couple of hooks on the window regulator. When its sitting in the hooks, the holes will line up and you shouldn't have any problems.

xT14x Coupe. Interesting.

Looks like a pretty clean pick up, apart from that dent in the rear door :( I see you like white? :P

Swaps for a fishtank?

Yea mate, just take it in and they should be able to knock one up exactly the same on the spot.

Panelvan doors Reed...

Ebay usually has a listing for brake hoses. Either that or any brake shop would be able to knock one up on the spot.

Definatly some crown hubbies for this thing :yes:

Hahaha, don't even joke about it :P

Happy Birthday Bloke. Hope ya had a good night last night and are ready for the 'sino tonight.

Spotted Mr Philbey again on friday night, parked on main rd blackwood. Mate loved your 16 :dance:

Found a shit load of pics from the Jan-Feb GOR trip. The 38 and RKE020 in Willalooka JZX100 Lovin Wade being a wank The trio FKN WINDMILLZ! 20,38,100 and Pozmans CAE55 Some Scenery Little 38 in Dean on the way home.

Spotted Mr Philbey approx 7:15am turning onto South Rd and Majors Rd. Then spotted TOM about 5:15pm on Fullarton Rd near Old Belair Rd. Thumbs up exchanged.

Friend has a N/A 3800 KE70. Drives ok. Cuts a Fat skid. Goes sideways. But does it handle? Not even close...

Find a cheap 5K, lock the diff. then take it somewhere far away from civilians and get some practice of how to control it. Down the track, look at upgrading your springs and shockers. Possibly look at coilovers and bigger brakes. Then start looking for more power, you can try forced induction K engines, The 4AGE family, SR20s, CA18s, 3SGE etc. Anything that isnt going to bolt straight in (All in the list except the K engines) is going to cost money and lots of it, if you can't do ALOT of it yourself.

Install Flange magnetos on any flat surface. Which with a KE70 = 99.999% surface coverage.

Play it safe and place one at both the front and rear. double the POWAH, none of the weight distrobution problems ;)