Taz_Rx Posted January 28, 2007 Report Share Posted January 28, 2007 no just a welded centre. come down to car accessories and ask for some sub box tie straps, they have clips on them so they are easily removable. I just used some to secure my fuel cell. Quote Link to comment Share on other sites More sharing options...
flat out Posted January 29, 2007 Author Report Share Posted January 29, 2007 nah mate my axle it stuck on the center and i don't realy want another weldie Quote Link to comment Share on other sites More sharing options...
flat out Posted January 30, 2007 Author Report Share Posted January 30, 2007 okay just thaught i could tell you some things that i will be pimping on my car soon, 4.3 ratio t series diff with my old sway bar mounts welded on, ra23 struts, lca's with new nolethene bushes toyota supra (1990ish) passenger seat just jap racing grey suede racing seat 4ke efi manifold coutesy of xany, i will then get the lower manifold part ported out to suit my 3k bigport and get a custom plenum made runing a xf 70mm throttle body, keep the comments rolling Quote Link to comment Share on other sites More sharing options...
Des Posted February 1, 2007 Report Share Posted February 1, 2007 Why a XF throttle body ? Quote Link to comment Share on other sites More sharing options...
flat out Posted February 1, 2007 Author Report Share Posted February 1, 2007 cause there massive and nick z told me to get one Quote Link to comment Share on other sites More sharing options...
Des Posted February 1, 2007 Report Share Posted February 1, 2007 Ummm ok. Quote Link to comment Share on other sites More sharing options...
HEKTIC Posted February 1, 2007 Report Share Posted February 1, 2007 sounds excessive, don't they run XF throttle bodies on rb25det's as an upgrade? sounds way to big even if your going to have a "fully sick 100hp 4k+et" Quote Link to comment Share on other sites More sharing options...
Des Posted February 2, 2007 Report Share Posted February 2, 2007 Excactly what i was thinking, They don't even use a thottle body that big on worked 4age's or 4agze's and they are making 160hp - 200hp. But if it works by all means go ahead and use it. Quote Link to comment Share on other sites More sharing options...
flat out Posted February 2, 2007 Author Report Share Posted February 2, 2007 nick z said:p oh well i have been thinking about a decompressed turbo engine but meh I'm more woried about riding now:p Quote Link to comment Share on other sites More sharing options...
Des Posted February 4, 2007 Report Share Posted February 4, 2007 If nickZ said jump would you say how high ? :P Quote Link to comment Share on other sites More sharing options...
NickZ Posted February 5, 2007 Report Share Posted February 5, 2007 Thats B/S, I never told you to get a XF throttlebody. I'm using a XF throttlebody on a 4KZE and its on the intake of the blower, But it wasnt really nessasary its only because i had it. Thats also maybe why i have 2 in my shed not doing anything. Quote Link to comment Share on other sites More sharing options...
flat out Posted March 5, 2007 Author Report Share Posted March 5, 2007 ^ chill out nick you psyco I'm going to be running a vl one mayte got my 4 runner diff and accesories Quote Link to comment Share on other sites More sharing options...
flat out Posted May 1, 2007 Author Report Share Posted May 1, 2007 up date yo! well nothing much has happend to the car, i got a 5" Autometer tacho with shift light back in febuary. iv collected some parts for my hilux diff conversion, i brought a lsd center off Ebay for $200!!! in working order pintara rear brakes, rotors need a machine bad!, also had a bit of a look tonight and the skyline disks are a hell of a lot bigger than stock ke55 disks i also have sent the diff off for the leaf and swaybar mounts to be put on now all that i need is a 4.3 ratio crown and pinnon, bearings for the center, axles machined down and re drilled and some brake adapters from Craft Differential i have been unable to contact them so thats giving me the heaby geebys. engine wise i have ditched the 4ke turbo idea and went for a N/A 2t with a cam the sweetest set of extractors and a twin side draft manifold ill be running a 32/36 till i find some cheap solex's or enough money for dellortos, iv seen them going cheap on ebay lately. will get pics of engine on sunday here are some of my goodies collected Quote Link to comment Share on other sites More sharing options...
jamesrolla Posted May 2, 2007 Report Share Posted May 2, 2007 did you go fishing and catch those rotors?? look like they been sittin in water for a while, did you get the stock r31 mounts because ive seen them modified to go onto other diffs, Quote Link to comment Share on other sites More sharing options...
flat out Posted May 2, 2007 Author Report Share Posted May 2, 2007 haha yeah i left them ion the rain, um yeah i have the r31 mounts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.