doing a 4age conversion into a ke55.. need to no how i can make a tailshaft that will fit my diff and the t5o box.

really stuck please need some advice.

cheers

make a custom tailshaft, weld the yoke to the front of your exsisting tailshaft. simple.

i recommend upgrading to at least a t series otherwise you will break it

not everyone can afford to shorten diffs cousin.

either pray the front doesn't snap at any sort of speed or use a loop.

what area are you in drift pig?

 

i have a tailshaft missing the front yoke for the t50(at the uni joint) to fit the standard ke30 diff. All you will need is a t50 front yoke and get a tailshaft place to put the uni joint on.

If I had to guess, Id say AE71 front section, Ke55 rear. Not sure though. Anyone tried this?

I have had plenty of tailshafts made up. You take in the front shaft/uni and rear uni you want to use along with mm distance between the centre of the unis. Then they make a custom shaft from a new tube and weld on your crap. Around $300 at driveline services gets you this plus reco'd unis and balanced shaft.

much appreciated guys. yeh I'm on the coast cuzzo, it wouldn't cost that much to send so how much?

universal driveline services at virigina in brisbane think its bilsen rd.

 

HAd 4 or so made up there take you yokes both ends and they get you to messure from the output shaft to the diff flange and from seal face to diff flange. The will then work out how much to add to that messurement.

 

Think my first one $240

 

last one was heavy duty 3' tube, super heavy duty hilux rear and a new heavey duty ca18 style front yoke and uni's. was $490 but built foir 500hp

 

I broke the 6cyl style ca18 and hilux unis with 280hp

 

Tell em that rob with the ca18 corolla sent you