Hi All!

 

Just wondering what is the offset for a KE55e 4 Door Sedan?

 

Have googled but my google skills = fail :hmm:

 

rofl

 

 

Thanks heaps!!

Edited April 22, 200917 yr by tbo92

Bump

Edited April 22, 200917 yr by tbo92

.......

Edited April 23, 200917 yr by styler

Plus 30 will have your rims rubbing on the struts. That's a FWD offset. My old +20's needed a 7mm spacer as there was only 1mm of space between the rim and the strut. 4 - 12 is ideal on a RWD corolla, +4 may need a light roll of the lip if you run wide rubber.

4 x 114.3 +27

 

Rang my local Bob Jane.

 

 

Thanks all for your imput!

 

someone should compile a list of these :hmm:

Considering my 14x7 +8 MA61 wheels sat just about perfect in the KE55 guards, 16x7 + 12 was the closest on the list.

 

Stock offset I think is +20, but that's on super skinny 80's spec wheels

Considering my 14x7 +8 MA61 wheels sat just about perfect in the KE55 guards, 16x7 + 12 was the closest on the list.

 

Stock offset I think is +20, but that's on super skinny 80's spec wheels

 

exactly..... +20 with a 5.5 imch wheel.

What would you recomend for a 7" wide?

 

Thanks guys! your knowledge amazes me

Go for the +4

get whatever gives you the same backspace, a few mm more or less should be okay.

 

+25mm is max track increase.

watch scrub radius and steering.

i run 15x7.5 +4 on the front on a KE55, sticks past guard even with some slightly stretched 195/50's.

and my guards have been "home flared" lol

i just put trx rims on mine and there 15x7 i put are 5mm spacer front and

back didnt need to roll my back graud and my back is dropped 2and are half inchs

i will put pics up on monday..

Thanks all for your replies, but i think i am more confused now then i was when i started :y:

 

if i purchase

 

http://www.rotawheels.com/images/products/rb_3.jpg

 

Those wheels, in a 16 x 7 4 x 114.3 +25

 

will they go onto my KE55 4 door sedan with out needing modifications to the car? ;)

 

or will i need spacers / guards rolling etc

 

also what size tyres should i put on these, 195/45/r16 ? (as i wish to keep profile reasonable low, and white wall them.) (or will they need to be more like 205/45/r16??)

 

Thanks heaps! :D i know one of more of you wonderful people will be able to answer that question :P

 

:)

Edited April 24, 200917 yr by tbo92

16 x 7 4 x 114.3 +12 with 195/40/R16 tyres will fit with no guard mods, maybe a slight lip at worst.

 

16 x 7 4 x 114.3 +4 with same tyres as above will fill gaurds nicely, will require a bit of flare of guards though, not much.

What would you recomend for a 7" wide?

 

Thanks guys! your knowledge amazes me

 

 

I used to run 15" x 7" 8P on the front of my KE30 with 195/50/R15

No srubbing issues and the tyres were inside the gaurds. These bumped the front track well over the +25mm limit, so they are gone now.

Edited April 25, 200917 yr by kangaroosa