December 21, 201312 yr Author comment_674085 It's been a while so here's a few pic's... things have been coming along nicely the bottom end is built ready to for the head which is in its final stages of porting its gonna be the best 1j head out there Report
February 9, 201412 yr Author comment_677186 Hey guys after all these years its finally getting some colour. :blinks: All the inside of the doors are painted engine bay and the rest of the inside of the car is next. The motor is ready for the cylinder head which is heavily ported with some amazing flow figures for a 1jz head it's all coming together more photo's to come :P Report
February 9, 201412 yr Author comment_677187 sweet dude, how's this thing going? what radiator are you using? I'm in the build of a 2jz ke38 with glide and 42gtx. hey mate we are using a modified ally 4 core radiator for a eh holden Edited February 9, 201412 yr by 1JZKe55 Report
February 9, 201412 yr Author comment_677201 who did the porting and whats the flow specs? https://www.facebook...139128586195488 Frank Intini Race Engineering did the head work one very smart guy when it comes to head work Inlet flowed 255.4cfm at 0.400tho lift Exhaust flowed 171.7cfm at 0.400tho lift A stock 1JZ head flows 215in and 133ex at .400 lift. Edited February 9, 201412 yr by 1JZKe55 Report
February 9, 201412 yr comment_677211 exhaust ports look real good, almost if not as big as the size of the inlet ports! Report
February 25, 201412 yr comment_678354 after a lot of stuffing around we decided to use an aftermarket intake and 100mm throttle body the firewall needed a little bit of work to get it to fit That's a great project there mate! I'm sorta doing a build (see it here: http://www.rollaclub.com/board/topic/68851-7m-gte-into-1976-te37/) but on a much smaller budget. The sheet metal work is off the chains!! I have the same manifold and throttle body. What TPS did you use? Report
May 28, 201412 yr Author comment_683384 hey guys its been a while but things are still progressing slowly motor is done Report
May 28, 201412 yr comment_683392 I can't use the emoticons from my phone but... drool! That is one serious looking engine! Report
May 28, 201412 yr comment_683395 nice, what specs did you go with your engine? I update the 1j list so ill be interested to see how you go once your finished. Report
May 28, 201412 yr Author comment_683398 The engine has been decked blueprinted and balanced SPOOL Forged H Beam Conrods CP Forged Pistons 1mm oversized Cometic MLS Head Gasket ACL Race Series Main Bearings ACL Race Series Big End Bearing 9.0.1 comp Full ARP stud kit rods,mains & Head Custom oversized Ferrea valves 6000 series, custom ported head Brian Crower cams and retainers, valve locks Report
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now