Des

Both my Corona's have "Driving lights" but are only switchable when high beam is on. Which all should be. Back topic.

Just drop a smallport 100kw 4age in it, It will be fun to drive and has alot more power & torque. 100kw 4age's can be picked up for just under $1000 in good nick. :)

I havent drivin a car on the road for 5 months, I don't own a registed car well until later today anyway, It does make transport a bit harder but you get use to it and i bet some of those learners will get use to it aswell.

Bring ya mum :jamie:

http://www.rollaclub.com/board/index.php?showtopic=5644

16 years of being hopeless is a hard habit to break.

Test and tune soon, Maybe meet somewhere and cruise out to the track, People don't need to race if they don't want to. Des :jamie:

Its a 4AFC, If its Automatic it should have a sticker/tag on the valve cover saying 4A/AT and for a manual 4A/MT. Take the valve cover off and see if the timing marks line up on head etc.

She has a real illness and she is probably the best out of all of them. C'mon having your L's for 16 years and 400 hours of lessons and you still can't take off without kangaroo hoping, I'd give up. Take the freaking bus. The people on this show are a hazard to themselves and the puplic, Didnt you see the add where she hit the pole and a parked car ? Take these people to a open track and teach them the basics of smooth taking off and braking etc.

Doesnt anybody watch this show on channel 7 ? Are these people mentally retarted or just useless. It angers me to see such useless unskilled people on our roads. Forgive me if I'm being a bit harsh but c'mon clutch control is not hard niether is steering. End rant. Opinions ?

4age or a 4ag with twin webers if your not a wiring guru.

I was charged $60 per hour to get stuff done for my Ke70 + material.

Find a Authorised engineer to either do the job and mod plate or just mod plate it if its done correctly.

Pointy nose for the win.

Love the RX4. :jamie:

A few custom bits going into this car, Nice to see something different.

That plate with the butterfly's in it is the TVIS plate, Boost's the torque up at low RPM. btw nice build up so far.

That cat better shhh! :n: Oh i hope so. :wub:

Sprinter = Over priced, 180sx = still to pricey for me. Rt142 corona and i will leave it at that.

Come to the test and tune and see it. nah, I will reveal it when ive tidied it up a bit.

Hey Hey, Test and Tune - 23rd of June. To run at these events you need: Requirements for a car - helmet to Australian Standards, long sleeve shirt, long pants & covered shoes. Requirements for a bike - helmet to Australian standards, leather jacket or equivalent, long pants, boots & gloves. Cars can not run quicker than 10.99 sec Bikes can not run quicker than 10.00 sec To run quicker than these you will need an ANDRA licence. Cost $36 to race, admits the driver and one other. Spectators $18 adults, $16 students with ID Children 13 & under are free. I want to go and test out my new weapon and get a correct time. PLENTY OF TIME TO CLEAR YOUR CALENDER PEOPLE. Peps going: Me (Des) V6 Corona. Teddy (Matt) MAYBE. 16v Ke70. Love ke70 (Andrew) MAYBE. 1ggte Ke70. Trev (Trevor) 16v ae82 twinky. LittleRedSpirit (Matt) 20v ae71 spirit. Nick (Nick) Red RS turbo. Beerhead (Brad) 20v ae71 Bogan racing (Mooney) V8 wb ute

Superlights look very very similar and do 12' 13' 14' 15' 16'

Well you will have 2 or 3 cylinders in front of the crossmember which will upset it, A 1jz into a corolla will not be cheap. A 1ggte looks very tight in a Ke70/Ae71 engine bay so a 1jz would be a killer to fit in. Think about the things that have to be done to fit it in: Intercooler + piping. Wiring + aftermarket computer. Gearbox tunnel mods + custom crossmember. Custom engine mounts or crossmember. Custom tail shaft. Will need a much stronger diff ie hilux. Fuel system upgrades. Exhaust. Radiator will most likely have to be mounted on the other side of the radiator support panel. Stock suspension wont do. Brakes will need to be upgraded. This is a Member from Toymods with Xt130 corona with a 1jz in it, Mind you Coronas are a bigger car but you get the idea.

I have a 4a to T50 bell housing if you are interested, I'm in Australia so postage would be alot. Des

15x6 with offset of +35 will fit on the back but not on the front, Spacers will rectify the problem but they are illegal.