JJT036

Cheers guys. :y: I'm one of the lucky ones with Pre-Emission 4K Ke36's, so I won't need all the emissions crap for it. Although, the 4K I'm about to drop in, is from a Fully-Emissioned KE70, but I should be safe. I'll be definitely going for the EFI, as it give's more power, for less Juice - although I'm not much of a Greenie myself. :P I'll need to find a Cat to suit a 2" system so we can just cut out a section of the Exhaust System, and weld the Cat into it. Josh :cool:

Yeah, but that's on Concrete Pots, not on Metal Panels... :D

Cheers Parrot. :y: We're gonna do EFI setup on the Ke36 and register it WITH the EFI. The most it'll do is put me in front to VicRoads because we'd be helping the emissions. We'll find a Commodore Cat for the RWC and Reg and leave it in there, so then the Motor won't Seize on us. :) Josh :cool:

Hey guys, Would I need to run a Catalyc Converter if I went for an EFI Setup on a 4K? Josh :cool:

Go See Hosea At Avondale panels Address: Cnr Wood St & Military Rd, Avondale Heights, VIC, 3034 Phone number: (03) 93177902

Lookin' good Jake. :thumbsup:

Ha Ha Nah I was going too fast too notice, i was in the ute tryin to see if i can go quicker than the speed camera i would have been at work before he even got through the intersectin LOL woz

Did you not see this one ?? http://www.rollaclub.com/board/topic/47639-ke36-panel-van/ if i had the spare cash it would be in my driveway easy repair !

Sad people will do anything to get out of a FAGNA

try these guys Aussie discount freight 02 42297781 or 0412 825 306 They specialise in cars trucks bikes aussie wide i got this out of one of Joshs street commodores mags Cheers. woz

Well it realy depends are you going to use yours box or his ?? > If you are going to use yours pullim together make sure its in nuetral then remove the gearstick and crossmember off the box, Ive done a few engine swaps in my time and never had a hassel, With the right engine crane and patiants its not that hard. But as people have said block the end of the gearbox or you will have oil everywhere I just put a plastic bag tape it { Plumbers tape } then put a neoprene stubbie holder over it and tape that. Cheers Woz

All good. Thought I saw ya. We went past the new SSS Auto Parts in Brunswick, and Dad sorta took the back way to Pascoe Vale, and I saw the Burgundy Sev with a someone who looked like you, and was Yawning and looking Depressed. Maybe she kept it because she knew it would've been worth some Coin in those few years. :hmm: Josh :cool:

He's found one, and he's working on it, but he doesn't have any money at the moment to buy one, which is why we're doing a mass sell-up on here, and CT. :yes: Josh :cool:

Gonna be, and is Looking Awesome Ben! Were you in a Burgundy Slanty-Sev on Pearsons Rd in Brunswick around 6.30pm tonight? Josh :cool:

:lmao: And Whitewall it? :lolcry:

Geez... I wasn't expecting to see Fender Mirrors as Red as you said they were. |blink| That really does look funny next to the Rolls. :lol: Looking good Brent, appart from the Red Mirrors. :) Josh :cool:

:lmao: :lmao: :lmao: That... is Hilarious! :lolcry: Thanks for the Ke70 Reed. :y:

Might be a long shot, being on an angle, but could you do this one for me? Josh :cool:

All good. Just make a new thread on the Kilmore Cruise if it's on. Make sure it's a Saturday around 5pm-ish as well. :) Josh :cool:

Pinstripe looks cool Reed. :y: Good to read that you now love Nanna-Visors. :) Josh :cool:

Very Very Nice Ke16 mate. I like the Wheels on it. :y: You mentioned Injected 1.3L. I'd like to see pics of the Engine Bay. :yes: Josh :cool:

Thanks guys. Reed (Blzbub666) did the Photoshop on Paint, but I love it. :) I NAG my Dad to do work on the Car with him, but I'm really happy that he helps me with this type of stuff. :) Josh :cool:

Awesome Collection mate! :worship: All you need now for a ute is a RS56 Crown ute, like Chobis' Blue one. :yes: Josh :cool:

THAT STARLET LOOKS BEAST! :lolcry: Love the AE86 and the KE70 Pano. You should drop a 4A-GZE in the KE70, and Sliiiiide. :thumbsup: Josh :cool:

No updates thus far yet. :( Yesterday, we started her up to move it back so Dad could wash his Ute (still for sale), and so I tried to move it back, but No Guts in the Motor. So Dad hopped in (being experienced in these Rolla engines), and also tried to move it back. So he put the foot down to regain the Power in the 4K... "Bwhrommmm ..*putput*.. wrommmm.. BANG!" Misfire! So he tried again, only this time it was louder. I nearly went deaf! :lolcry: After each the Misfires, Big Black Balls of Smoke come out of the Exhaust Pipe. We've estimated that now she only runs on 2 Cylinders, and produces 5kw. :lolcry: So the KE70 4K is a must to drop in, and I've said to dad that the Car is not to be started again until the new 4K is in. :) We've already discovered that the Bottom End has a Serious Knock when you start it up and warm it up, but what else could cause this? Josh :cool: