Search the Community
Showing results for tags 'itb'.
Found 4 results
Hey all, new to all this build thread business but here goes. I'm Ollie from ye olde Hobart, currently 19 and slowly working away at this project of mine. It's an '84 ke70 wagon that I picked up close to two years ago now, paid $2150 which might have been a tad too much due to the rust but ahh well. This is how it sat as I got it Pretty much as soon as i got it home I tore it apart to inspect the rust. Wasn't too happy with what I found.. This was the worst of it as well as the usual in the guards, gutters and a few other stray spots. Unfortunately I had to do a quick fix as my brother sold his car and needed mine. So that involved sanding back, rust treating and a mix of bog and fibreglass. Not pretty but it worked. Going to weld new metal in there to fix it permanently. It was sitting way too high in the rear so next on the list was some 2.5" blocks and flipping the bottom leaf to the top to flatten it out. This was the result and I was fairly happy. Again, not permanent, I plan to get the leaves reset. It basically sat like this for a while as I gathered parts. I am now getting much more serious about making this as clean as possible, and doing things properly. I have been cleaning and painting as much as I can, probably due to my undiagnosed ocd.. My plans for this is to have a slightly worked 4k with, twin dcoe's, extractors, Tighe 154 cam grind, 1.75-2" exhaust, wheels, coilovers, new bushes and a lick of a nice neutral colour. Currently thinking of a grey of some sort but still undecided. I'll leave it at that for now, but ill try get these posts up to date with where I am currently at asap. Cheers, Ollie.
Hey guys I was wanting to know how I go about connecting my ke70 throttle cable to the 20v throttle bodies I have on my 16v 4age. I tried to find info on this but could not find much, I know the ke70 cable is long enough to reach unlike ae71 but just wondering how to do it properly. Any help would be much appreciated.
Here is my celica i have had for a few years and have had a few engine combos. she was a clean two owner before i got her now i guess she is a dirty three owner. i have currently put the 2tg back in and am fabricating some throttle bodies which are 95% done then do some wiring etc etc.
Hi all, I'm in need of a carby tune on a dyno. The carburetors are Mikuni CV ITB's (off a GSX1100R I believe) and they're strapped to Phil's twin cam 4K. They're currently running very lean due to changing the air filtration system and it looks like it's gonna need a whole new set of jets/needles to be selected. I need to know two things: Is there someone around Brisbane who is capable of getting these just right, and what am I expecting to pay? I've been told it's not gonna be cheap, but I'd really like to know how much roughly it will cost. Thanks!