saw this up at my local mechanics today.....had to take a pic and show you guys. supposedly some cotton farmer with too much money? ;)

mmmmmm its m series *e7* :laff:

interesting lol.

The fundamentals are good... Engine would comfortably trounce anything A or K powered...

 

But my god... Those wheels, dat paint.

Edited November 22, 201114 yr by 7shades

i don't think its a real race car, look at that bolt in cage. I don't think cams allows bolt in cages?

 

might look ok with bettter wheels, i don't mind the paint for a race car. gotta stand out eh. though maybe only have 1 colour change, not 4.

I don't think cams allows bolt in cages?

 

Sure do:

http://www.camsmanual.com.au/pdf/10_gen_req/GQ11_2012_Schedule_J_Q411.pdf

18.2 Mounting Points of the Front, Main and Lateral Rollbars or Lateral Half-Rollbars:

(a) Each mounting point shall include a mounting foot consisting of a plate at least 3mm thick.

Each mounting foot shall be attached by at least three bolts to a steel reinforcement plate at least 3mm

thick and of at least 120cm2

area which is welded to the bodyshell. Where attached by bolts, the angle between

any two bolts shall not be less than 60° (measured from the tube axis at the level of the mounting foot

circumference – Drawing J-60).

 

You have to weld reinforcing plates to the chassis but its still a bolt in cage.

Actually it depends on the age.

 

If it has a logbook old enough, it may even be an alloy bolt in cage and still be legal.. *shudder*

I have seen those plates before on something enticing many years ago, hmmm :hmm:

I think the shape and colours make me constantly read the plate as SNES.... :laff:

 

Super nintendo anyone?

even the original, Nintendo entertainment system aka NES!

What was behind it and under the RX7?? Austin Healey? MG-B?

What was behind it and under the RX7?? Austin Healey? MG-B?

 

or potentially an AC Bristol but highly unlikely :hmm:

I was gonna say RX2 two door, but sittin a bit low up back

not sure exactly what it is, but i know its getting a rotary and its going to be some form of racecar.....the wheels are 4x114 and 13x8 steelies....mad dish ;) the white one next to it is an rx2 or 3 i think? the guy that runs the shop is matt the mad rotary man....also the one who owns that clean lil ke10 i posted up earlier on in the year